Help please on Philips 32PFL3404 NVM values

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Mayday30
    New Member
    • Jul 2010
    • 4
    #1

    Help please on Philips 32PFL3404 NVM values

    Hi everybody, I `m new in the forum, and need some help.

    I have a 32PFL3404 model with blank screen (for bad use of service mode. sound is OK).

    The big problem is that my LCD doesn´t have any sticker with the DISPLAY CODE, i´have tried many codes already but nothing seem to work.


    Please, anybody have this particular model?.... i need those 3 digits.

    062598 MENU XXX <-------

    Thanks in advance

    (Excuse my english)
    Tags: None
    • Mayday30
      New Member
      • Jul 2010
      • 4
      #2
      Re: Help please on Philips 32PFL3404 NVM values

      nobody have this model?

        Comment

        • Mayday30
          New Member
          • Jul 2010
          • 4
          #3
          Re: Help please on Philips 32PFL3404 NVM values

          cri cri cri cri cri cri cri............

            Comment

            Previous template Next

            Related Topics

            Collapse
            • proxneo
              Recapping Sony ICF-SW55 - verifying cap values
              by proxneo
              Dear reader

              I am performing a repair on a Sony ICF-SW55, which includes recapping (some) of the SMD capacitors on the mainboard. I am looking for verification of their values. At the moment, I'm 95% sure I've got the right values, but it is hard to find some official, credible or multiple independant sources on this.

              At the moment, I have selected replacements based on the following list of values:

              3 x 470uF 10VDC
              3 x 4.7uF 35VDC
              4 x 47uF 50VDC
              8 x 22uF 6.3 VDC
              1 x 220uF 6.3VDC
              5 x 100uF 6.3VDC

              Which...
              06-21-2023, 12:38 AM
            • rashidjafar
              Nvidia GTS 250M Laptop graphics - Inductor and Capacitor values
              by rashidjafar
              I am looking for capacitor & Inductor values for my TOSHIBA Qosmio X500-110 - mobile graphics - Nvidia GTS 250M Laptop.

              Values for :-
              =========
              PC43 : Capacitor [3x1.5mm]
              PL7 : Inductor [2x1mm]
              PC39 : Capacitor [1x0.5mm]

              Any ideas would be appreciated.




              I can get Capacitor values from nearby components but wanted to know the max ratings also I dont have equipment to measure inductors....
              08-07-2025, 05:10 PM
            • G33RT
              Philips 8200 series 65PUS8204/12 stuck at Philips Logo
              by G33RT
              Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

              It does power up when pressing the power button.

              I already try the power button while plugin the plug with no result.
              Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

              Could this be an PSU or eMMC issue ?
              07-19-2025, 03:43 AM
            • Kobok
              Different (lower) resistor values on PCB?
              by Kobok
              Dear Alls,
              For sure it id a stupid question, but help me to understand. I am in a Dell 2007WFP revitalizing project - searching reason why not starting. Some resistors needed to replaced is is obvious. When I have soldered some resistors the measured (with multimeter) values were sometimes rather different written on them. I supposed these are wrong units so I desoldered and made a checking measurement and voilá the values is the same is written on. This happens only in case of a few resistors, most have the same values (+/- 10%) are written on it. "strange" SMD resistors =>103...
              09-19-2022, 07:30 AM
            • double_DD
              Philips curling iron - is this a common AC cable?
              by double_DD
              Hi all,

              Wife has 2 Philips hair curling irons half defective - after learning how they're supposed to work and testing them, it turned out that both have defective power cables, and both on the same place; broken wires due to wire bending.
              As they were both relatively easy to disassemble, and cables are plugged not soldered (as they can rotate in the handle), I was sure it would be easy to find replacements. But - NO! I'm unable to find anything similar on ebay or Aliexpress.

              Not sure if this is something Philips proprietary, or a standard, but the cable plug...
              08-18-2025, 10:04 AM
            • Loading...
            • No more items.
            Working...