hy i got qled qe55q7fam the previous owner said the picture was jumping so he tried fixes and destroyed the mainboard )ripped off cpu) i ordered a new mainboard all the data from old board are same as the new one serial numb model etc only what is diferent is screen type mine is y-qm055flav2h and the new board original screen was CY-QM055FLLV2H i tested all the voltges on powerboard all cheks ok so when i plug tv kinda turns on i got only backlight its responsive to controler but no picture and the standby light is solid red any good advice its the screen type problem and can it be changed somehow, thank you
samsung qe55q7fam no picture
Collapse
X
-
Tags: None
-
Re: samsung qe55q7fam no picture
forgot to mention tried left and right ribbons off and on just one side conected nothing changes -
Re: samsung qe55q7fam no picture
You've got 2 problems, bad ma.bo. settings programming, and bad gate driver on panel, first try to swap 24c eeprom from old to new board, then turn on and keep exit key pressed for about 15 sec, then turn off then on and pray for the image to be visible, next step coming soon..Last edited by Davi.p; 08-29-2022, 06:09 PM.Comment
-
Re: samsung qe55q7fam no picture
hy im sorry for late reply iwebeen moving and didnt have a working space for repair tv now i have tried swap bios chip and hold exit button but still no picture any other helpComment
-
Comment
-
Re: samsung qe55q7fam no picture
just an update i found a matching mainboard for 60e bought it and now it works im really thankfull for you helpComment
-
Re: samsung qe55q7fam no picture
ok, then to sum up, jumping picture, tried wrong mainboard, no joy, got the right mainboard, tv fixed.Comment
-
Re: samsung qe55q7fam no picture
jumping picture has been resolved with new mainboard and new flat cablesComment
Related Topics
Collapse
-
by IerwinHello everyone,
Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
Anyway I still fully expect that there has been something seriously damaged... -
This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-07-2024, 05:50 AM
-
by JJAAMMThis was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.
Problem
TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode... -
by MgiffuneI have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly ‘new' Tcon board this time, and... -
by DodgethisHello all,
This is my first post, but long term lurker on the form learning as much as possible about these TV's. I was given this TV as due to a power outage of constant On/off of power to TV. The TV originally would just click on and off (Typical Reboot Cycle). I opened the back of the TV, and troubleshooted by taking the 96 pin LVDS off one at a time to see if I had a picture on either side. I finally fixed the reboot cycle by finding the error on the left side of the screen off connector CN 1301, and the TV would stay on. Further troubleshooting led me to the driver boards where...5 Photos - Loading...
- No more items.
Comment