Can anyone help I have been unable to find a replacement remote or even compatible for this smart tv. I know it is a Vestel clone so wonder if any other remote would have the same frequencys?I have purchased replacement remotes which are identical to look at but do not work.
-
-
Re: Linsar 55UHD8000FP Remote
Those won't work for you?: https://www.ebay.co.uk/sch/i.html?_f...acat=0&_sop=15 -
Re: Linsar 55UHD8000FP Remote
wonder if your sensor/button board went bad, probably looks like this: https://www.ebay.co.uk/itm/155023787...QAAOSwPPxim2tlComment
-
Re: Linsar 55UHD8000FP Remote
I see Richersounds had this model listed for sale as recently as a year ago and listed it with a 6 year warranty so they or other retailers who sold it may have some kind of line of support from the OEM or importer to supply replacement remotes if you contact them.
Did you buy the £18 "Linsar Big Button Remote Control" listed on linsar.com?Comment
-
Hello all, I've been looking into this portable air conditioner's remote control and can't find what could be causing the problem - or possibly this remote is just terribly designed.
The remote only works at exactly 3V - if I drop it any lower, using my bench power supply, to say, 2.9V then the remote will not flash the display and turn off. I don't have any AAA batteries that are exactly 1.5V each so I'm not sure if this remote is designed this way - to only use the freshest possible batteries, or if there's a failed component in the mix.
I can't find any schematics... -
I have this receiver for at least 10 years. Usually, we just use the remote for turning on/off and adjusting the volume. Recently, the remote control started not able to turn the receiver on. Later, the volume also could not be adjusted by the remote control.
At first, I thought that it was the usual problem which can be fixed by cleaning the contacts on the switches and the pcb. I opened the remote and clean it with alcohol. The remote did work again after that. But after one day, it did not work again. I opened it again and clean with alcohol and contact cleaner. Again it worked... -
I’ve got a subwoofer that I’ve had for nearly 20 years, it did come with a basic remote which I’ve lost. It’s a generic make of subwoofer, I can’t see a brand sticker on it. It comes with 2 speakers.
Question recently I’ve connected it up to my tv which has greatly improved the sound on my tv, however I’d like to be able to mute the subwoofer when ads come on or just mute it when the phone rings etc. I tried using a cheap all in one tv remote on the subwoofer and the volume button would only work to increase volume but not turn it down or mute it
Is there... -
Hi,
I have this TV a small 20 inch that works perfectly except for the IR has stopped. I have confirmed that the remote control is fine and tried an alternative and even tried with IR blaster from phone. Remote 100% ok.
Tried installing latest firmware but no change.
TV won't respond to remote at all, not even to bring it out of standby. I have to use the touch sensitive front panel to operate, at which point TV is usable albeit with no remote.
Tried replacing the IR receiver diode/bulb on front panel and no change so put the old one back. After tracing... -
Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".
It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...07-31-2025, 08:37 PM
Comment