LG 32LF510B - EAX66453203(1.0) Need Firmware

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • vabea
    Member
    • Dec 2019
    • 41
    • Portugal
    #1

    LG 32LF510B - EAX66453203(1.0) Need Firmware

    Hello i have a lg 32LF510B ( EAX66453203(1.0)) that dont power on, only power led lights up continuously
    i want to reflash firmware to test, so if any one have i apreciate

    regards
    Tags: None
    • vabea
      Member
      • Dec 2019
      • 41
      • Portugal
      #2
      Re: LG 32LF510B - EAX66453203(1.0) Need Firmware

      Hi, i have found, but still not power on, i have all the tensions on the board so any idea what could be the problem?

      If any one need a attached the firmware
      Attached Files

        Comment

        • vabea
          Member
          • Dec 2019
          • 41
          • Portugal
          #3
          Re: LG 32LF510B - EAX66453203(1.0) Need Firmware

          This is the datasheet i used
          Attached Files

            Comment

            Previous template Next

            Related Topics

            Collapse
            • TheUser
              Thinkpad Docker G2 Type-C 40AS - Firmware Unknown
              by TheUser
              Hello to everyone ,

              This is my first post here, and i would like to share with you a small story in case you can help me.

              Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.

              All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work

              I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...
              02-10-2024, 02:07 PM
            • zklgfs
              Anker SoundCore 2 Bluetooth Speaker Turns Off After a Few Seconds (Possibly Firmware Issue?)
              by zklgfs
              Hi,

              I have an Anker SoundCore 2 (A3105) that I saved from the trash (well, I guess there's a reason why it was supposed to go into the trash...). The problem is that it always turns off after a few seconds (sometimes it stays on a bit longer, between 30 and 60 seconds, but it still turns off). The power light turns on and the bluetooth light starts blinking, but both abruptly turn off again. The "turn off sound" is still played after the lights turn off. Sometimes, it also loops the on-off cycle several times without me pressing any buttons. If I connect an AUX cable, music...
              08-11-2025, 02:14 PM
            • gurj1979
              Ubiquiti firmware help. US-8-150W POE
              by gurj1979
              Hi guys.

              I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
              Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.

              So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
              Got New chip and writes good.

              THE PROBLEM...
              It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.

              Does anyone have a Good Firmware I can have?...
              07-22-2024, 05:13 PM
            • wattage
              AOC AG493UCX 49-inch monitor - Firmware request
              by wattage
              Hello Badcaps Community,

              I purchased a preowned AOC monitor that is not working and out of warranty. It was sold as not working. I am looking for guidance on self-repair. In particular, I am after the firmware for the monitor. At the end, I have included monitor model information and links to pics and vids of the issue.

              The problem is that it will not display a picture on any of its inputs. And the on-screen menu does not appear. The power button works properly. It powers on with the remote as well. But the on-screen menu does not appear, even when not connected to any...
              07-13-2025, 04:41 PM
            • sikocan
              NP930XED Samsung Galaxy Book2 Pro Laptop PD Firmware Loop
              by sikocan
              Hello,

              I hope this message finds you well. I wanted to share a recent experience I had with a laptop that had a Type-C Port issue, specifically related to a PD (Power Delivery) controller problem. After replacing the damaged PD controller chip with a new one I purchased from AliExpress, the laptop now charges properly and negotiates power as expected, allowing the device to power up. I've replaced this chip twice just in case.

              However, it seems that the laptop's BIOS is detecting an older version of the PD Firmware on the newly installed chip. As a result, it attempts...
              01-11-2024, 01:47 AM
            • Loading...
            • No more items.
            Working...