Lg 49uf6400...leave it to lg to put in some stupid backlight connector

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • DXseekerMO
    Badcaps Legend
    • Feb 2018
    • 1119
    • US
    #1

    Lg 49uf6400...leave it to lg to put in some stupid backlight connector

    LG 49UF6400....LEAVE IT TO LG TO PUT SOME STUPID BACKLIGHT CONNECTOR on the LED strips that TAKES A MENSA CERTIFIED GENIUS to figure out how to detach.

    Can anyone tell me how these connectors detach from the LED strips?

    Thanks for your help folks!
    Attached Files
    They call me......."threadkiller"
    Tags: None
    • ramondo
      Confused Member
      • Jun 2015
      • 39
      • USA
      #2
      Re: Lg 49uf6400...leave it to lg to put in some stupid backlight connector

      Google LG Led image, looks like squeeze and lift. Not exact but close.
      Attached Files
      Thanks to all for being__WAR_KITTENS____!

        Comment

        • neilc6
          Badcaps Legend
          • Nov 2015
          • 1550
          • Canada
          #3
          Re: Lg 49uf6400...leave it to lg to put in some stupid backlight connector

          It pops up like the LB strips.

            Comment

            • DXseekerMO
              Badcaps Legend
              • Feb 2018
              • 1119
              • US
              #4
              Re: Lg 49uf6400...leave it to lg to put in some stupid backlight connector

              Originally posted by ramondo
              Google LG Led image, looks like squeeze and lift. Not exact but close.
              Originally posted by neilc6
              It pops up like the LB strips.
              I was able to lift the connector and detach it. THANKS!
              They call me......."threadkiller"

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Tynan Dill
                  Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                  by Tynan Dill
                  I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                  Upon bringing it home and plugging it up, it showed a standby light.

                  I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                  The screen seems to blackout and stay black, but with a flashlight I can see the display.

                  With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                  Assuming...
                  ORIGINAL POWER SUPPLY BOARD
                  7 Photos
                  11-22-2024, 01:46 PM
                • Tomylee
                  No LCD image after connector replacement – lifted components and damaged resistor (Nintendo Switch Lite HDH-CPU-02)
                  by Tomylee
                  Hi everyone,

                  Sorry for the person who’s going to read all this !
                  I'm on a Nintendo Switch Lite, motherboard HDH-CPU-02.

                  While replacing the left joystick, I had to remove the motherboard to access the connector underneath. When I lifted the LCD connector latch, it broke (the plastic had become brittle over time), so I replaced the entire connector.

                  During the desoldering of the LCD connector using hot air, three small components located just below the connector (likely 0402 capacitors) came off and remained stuck to the bottom of the...
                  07-11-2025, 11:52 AM
                • 5mall5nail5
                  Help identifying connector for ASUS 4090 Strix RGB LED connector
                  by 5mall5nail5
                  Hi All -

                  I had replaced my ASUS 4090 Strix cooler with a waterblock and put the stock cooler on the shelf. Was moving it and snagged my sweater on the connector and pulled the wires out of the pins on the RGB connector. I tried to get them back on but its too small so I opened the stamped pins and tried to solder but its not a good repair and the wire broke on reinstallation.

                  Looking to replace the connector on the cable side and get pins to crimp onto a new cable. Bought random JST and such but nothing is correct. Can anyone help identify the connector and possibly matching...
                  05-04-2025, 07:47 AM
                • bussincaps
                  MacBook Pro Mid-2014 A1398 Retina LED Controller Connector [First Repair (Disaster)]
                  by bussincaps
                  Hello All,

                  tl;dr: minimal electronics experience and my first repair, lifted 8 pads off the laptop display LED controller board when attempting a connector replacement, options are attempting pad repair or jump wiring.

                  Laptop Model: MacBook Pro 15 Mid-2014 Retina, A1398 MGXA2LL/A
                  eDP Display: Samsung LSN154YL01-A02, assembly sold as Apple part 661-8310
                  Soldering Equipment: Hakko FX-888D w/ T-18 tips (Chisel, Conical, Bevel types)

                  I needed to replace the 30-pin I-PEX Cabline connector (labeled J8300 in the Apple 820-3662 mainboard schematics),...
                  08-03-2023, 12:57 PM
                • michhak
                  Toshiba Satellite M50-A keyboard connector on LA-A481P motherboard
                  by michhak
                  Hi guys,
                  i have a damaged keyboard connector on my older Toshiba Satellite M50-A laptop. I know there is LA-A481P motherboard. In attachment pictures there is a real looking connector and i also found a schematic to the connector. But i need help with finding a real electronic part to replace the damaged connector. e.g. on aliexpress (or different page).
                  It is 34pin connector and the length from pin n.1 to pin n.34 is 26mm. So it means a pitch length is 0.764 mm. I have seen connectors with 0.5mm , 0.7mm , 0.8mm and 1mm pitch length. But not with 0.75. Is it some special custom connector...
                  11-17-2021, 05:45 AM
                • Loading...
                • No more items.
                Working...