Sony KDL55W800C Lines Across panel

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Hwciua4i
    New Member
    • Jun 2021
    • 2
    • US
    #1

    Sony KDL55W800C Lines Across panel

    Hi,

    I have a Sony KDL55W800C which suddenly started showing horizontal lines moving up and down the screen. Initially, it would return to normal after a while but then it stayed for a few days.

    I have now replaced the mainboard and the T-Con panel on the unit and the issue persists.

    Any help on troubleshooting and getting the TV back to regular working condition would be greatly appreciated.

    Thank you!
    Tags: None
    • neilc6
      Badcaps Legend
      • Nov 2015
      • 1550
      • Canada
      #2
      Re: Sony KDL55W800C Lines Across panel

      Horizontal lines are bad panels. However, if you have a tcon board, you may be able to repair it with the tape cutoff method.

      https://techhometravel.com/repair-of...lines-on-a-tv/

        Comment

        Previous template Next

        Related Topics

        Collapse
        • howardc64
          TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
          by howardc64
          All left and right refers to looking from rear of TV (or looking from front with TV upside down)
          • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
          • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
          ...
          07-24-2025, 05:17 PM
        • Raulnn
          Sony KDL-50W685A horizontal black lines Pattern
          by Raulnn
          good morning! I have a problem with this Sony. The image has a pattern of black horizontal lines, I attach a photo of the lines. The power supply is external and emits a sound. I don't think it's because of that. Let's see if someone can help me.
          3 Photos
          12-10-2023, 06:50 AM
        • dvu0627
          Sony XBR65X900H TV with Horizontal Lines right half of screen
          by dvu0627
          I have a Sony Smart TV XBR65X900H that started to have horizontal lines on the right side of the screen (see attached picture). When I played video on Youtube green horizontal line at regular intervals(1/4") across the screen.
          I replaced the T-Con board but the lines are still there.
          I believe this issue is from the Main Board. Before I replace the Main board, I wanted to seek advise if this is the problem from the Main board or something else?
          Thank you for the help....
          02-05-2023, 03:39 PM
        • Kieran87
          Sony Bravia KDL 46EX520 Faulty T-con board or LCD panel -- Horizontal lines
          by Kieran87
          Hello,

          Yesterday, horizontal lines appeared on my television and I am unsure whether the problem lies with the T-con board or LCD panel.

          I have removed the back housing and visually there are no obvious electronic issues. I then removed one of the ribbon cables from the T-con board, which resulted in blacking out half of the screen and the other half appeared normal (ie problem resolved - no distortion). I replaced the ribbon and then removed the second ribbon and there were horizontal lines across the entire screen.
          I have attached several photos.
          ...
          05-02-2019, 02:27 AM
        • learnmore
          Samsung UE70TU7020K Which lines to tape on a bad panel
          by learnmore
          Hello Community,

          I'm working on a Samsung UE70TU7020K.

          It looks like a bad panel. There is only 1 FPC cable from the Tcon (built into mainboard) to the panel.

          I'm using a piece of tap a few mils (covers about 8-10 pins), at different locations and have had varying results but nothing that is remotely watchable (multiple lines across all the screen, half screen and total black out on screen). The buffer board is divided into 3 boards. I've disconnected the end board one at a time but each time the screen was totally black. I presume it's because the potential...
          03-15-2024, 03:01 PM
        • Loading...
        • No more items.
        Working...