Hyundai FL40S311SMART firmware please

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sopik78
    Badcaps Veteran
    • Nov 2013
    • 517
    • Czech Republic
    #1

    Hyundai FL40S311SMART firmware please

    Does anybody have a link or file to share for TV Hyundai FL40S311SMART with main board 17MN95M and screen VES395UNDC-2D-N01?
    The problem is, that TV is working only a few minutes after switch on and then shuts off. I would like to try reprogram FW.

    Thanks a lot
    Tags: None
    • sopik78
      Badcaps Veteran
      • Nov 2013
      • 517
      • Czech Republic
      #2
      Re: Hyundai FL40S311SMART firmware please

      Sorry, main board Vestel 17MB95M

        Comment

        Previous template Next

        Related Topics

        Collapse
        • joby91
          SONY KD-55AF9 OLED MAIN-BM3-1-983-356-11 EMMC Firmware
          by joby91
          Hello,

          I have SONY KD-55AF9. Mainboard MAIN-BM3-1-983-356-11 with defekt EMMC.
          I wanted to buy new EMMC and Flash the firmaware on it. Does anyone have the firmware for this TV. I would be really grateful.

          I found one chat about firmware on ************** forum but i cannot read the comments.

          https://**************/forum/108-114100-1#880537

          ​
          09-04-2024, 01:34 PM
        • chevellebbc@yahoo.com
          Static?? If I hover over the main board it shuts down
          by chevellebbc@yahoo.com
          Hoping for some newbie help. I had a tv in the basement for years that needed diagnosis. Finally got to looking at it. First was a backlight issue. Power supply checked out and replaced the led set. Then when the main board plugged it the backlights shut off. So pulled the main board tested as many components as possible and didn't find the culprit. So sourced an eBay one for cheap hoping it was something correctable. But now with the timing board unplugged the tv will start with backlights and stay on. However if I touch the ribbon it'll attempt to shut down. Now if I even hover my hand above...
          03-18-2023, 09:37 AM
        • Dani_2024
          Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
          by Dani_2024
          Hi and thanks in advance for any input you might provide!
          I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
          Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

          Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
          5 Photos
          10-28-2024, 05:06 PM
        • TheUser
          Thinkpad Docker G2 Type-C 40AS - Firmware Unknown
          by TheUser
          Hello to everyone ,

          This is my first post here, and i would like to share with you a small story in case you can help me.

          Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.

          All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work

          I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...
          02-10-2024, 02:07 PM
        • gurj1979
          Ubiquiti firmware help. US-8-150W POE
          by gurj1979
          Hi guys.

          I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
          Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.

          So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
          Got New chip and writes good.

          THE PROBLEM...
          It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.

          Does anyone have a Good Firmware I can have?...
          07-22-2024, 05:13 PM
        • Loading...
        • No more items.
        Working...