22le357ou , hitachi tv . Spi chip u10 dump required .

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zen
    Badcaps Veteran
    • Apr 2011
    • 511
    #1

    22le357ou , hitachi tv . Spi chip u10 dump required .

    Hi all

    Hoping someone can help .

    MAIN BOARD = MSD306.3B

    SPI CHIP REF = U10

    SPI CHIP MANUFACTURER = GIGADEVICE

    SPI CHIP TYPE = 25Q32SIP

    DISPLAY = BOE HT215F01-100.
    Attached Files
    Tags: None
    • zen
      Badcaps Veteran
      • Apr 2011
      • 511
      #2
      Re: 22le357ou , hitachi tv . Spi chip u10 dump required .

      Loaded some files from a Bush make , version of this set & it now powers , plus produces a good picture.

      Logo at start up is Bush , instead of Hitachi , but that not an issue .

      What is a problem though is that the on board button configuration differs , but even this won't be a problem , providing i can find out what model Bush TV the files are from & order a remote control for it .

        Comment

        • zen
          Badcaps Veteran
          • Apr 2011
          • 511
          #3
          Re: 22le357ou , hitachi tv . Spi chip u10 dump required .

          Googled main board number , adding bush .

          Model seems to come up as BLED22FHDL8

          Might take a chance & order up a remote for this model.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • acedogblast
              Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
              by acedogblast
              This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

              There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
              11-02-2024, 05:13 PM
            • DynaxSC
              ASRock B650M PRO RS - BIOS CHIP 25Q256JW BLOCKED BY STATUS REGISTERS
              by DynaxSC
              Hi

              I have a very strange issue with the BIOS SPI chip of an ASRock B650M PRO RS motherboard.
              The SPI chip is an Winbond 25Q256JWEQ model (1V8).
              The motherbaord doas not POST - it lits only CPU and DRAM EZ Debug Leds, and stays that way forever.
              The Flashback function of the motherbaord is also not working, despite all instructions followed correctly - I'm 100% sure of this.

              I have then desoldered the chip, backupped the contents, and tried to earease the chip in order to program stock image, but the chip is locked by status registers SREG2 (TB) and SREG6...
              08-04-2025, 12:20 PM
            • hyperwood
              [REQUEST] 2MB BIOS Dump for Lenovo NM-E471 Rev 2.0 (Winbond 25Q16JWSIQ Chip)
              by hyperwood
              Hi everyone,

              Iā€™m looking for a 2 MB BIOS dump for a Lenovo IdeaPad 5 16ARH7H / Legion 5 with mainboard NM-E471 Rev. 2.0.

              The BIOS chip is a Winbond W25Q16FW (1.8V, 2MB) and it's completely unresponsive / bricked. I tried recovery via USB but no success. Now I want to reflash it externally using a CH341A programmer.

              I already found 32MB dumps (e.g. from Vinafix and Badcaps), but they are too large for the chip ā€“ and the last 2MB in those files are just FF FF FF....

              āœ… What I need:
              • A working 2MB BIOS dump
              • Matching NM-E471 Rev. 2.0, e.g. JY575
              ...
              06-25-2025, 02:28 PM
            • tyler123456
              Need help identifying an IC chip on a Bush DAB radio (BD-1801)
              by tyler123456
              Hi,

              Not sure whether anyone can help but I'm trying to identify the IC chip in the photo below.

              I purchased a faulty Bush DAB radio (model # BD-1801) and identified that an IC chip was blown on it. Unfortunately, I couldn't read the manufacturer name / model number of the IC chip.

              I purchased another (working) BD-1801 so that I could open it up to find out the IC details - but the IC chip details are missing (as you can see in the photo.)

              Given the two huge blobs of solder either side of it I'm guessing it regulates power(?)

              Anyone...
              1 Photo
              08-16-2024, 12:51 PM
            • Andreas_de
              Power supply Manson NTP-5561 (5661) LCD controller dead - PIC18F87K90 HEX dump required
              by Andreas_de
              Hello!

              i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
              Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.

              Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
              ...
              2 Photos
              04-12-2025, 10:38 AM
            • Loading...
            • No more items.
            Working...