Lguf850v

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • storexxm
    Senior Member
    • Oct 2012
    • 107
    • Vienna
    #1

    Lguf850v

    Hello hello.
    I am interested to buy this broken tv.
    I've never seen this kind of a distorted video output.
    Do you think this can be a ribbon issue? Or more a faulty t-con board?
    Would be nice to hear your thoughts.
    Greetings
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • storexxm
      Senior Member
      • Oct 2012
      • 107
      • Vienna
      #2
      Re: Lguf850v

      Unfortunately I there's no story behind this tv... just went bad. Worst case would be a damaged panel... but what do you think...?

        Comment

        • nomoresonys
          Badcaps Legend
          • Jan 2013
          • 12331
          • U.S.
          #3
          Re: Lguf850v

          It's all about price, never pay very much for a damaged tv, it's very hard to tell for sure from just a display, had one that looked like a bad panel the other day from just looking at display, turned out to be several bad caps on powerboard. So you just never know til you get in and look around or start testing.

            Comment

            • storexxm
              Senior Member
              • Oct 2012
              • 107
              • Vienna
              #4
              Re: Lguf850v

              Yeah... u are right.. it is too expensive to guess the damage. Thank you.
              --closed--

                Comment

                Previous template Next

                Related Topics

                Collapse
                • zesko
                  xps 9520 ribbon cable
                  by zesko
                  Hello,
                  I have a XPS 9520 with broken daughter board and missing ribbon cable. I can fix the board by replacing the connector, but I can't find the correct ribbon.

                  There is 2 models, idk which one is needed on my laptop.

                  0xkvng
                  00vpr2

                  Daughter board is LS H822P. When I check for a palmrest, the board attached to have a 0xkvng ribbon. But when I check for LS h822p, it's 00vpr2 ribbon...

                  Someone can help me with that please ? Idk the difference between these 2 ribbon but they definitely doesn't look the same..

                  thanks...
                  10-23-2025, 05:03 PM
                • maleksa
                  Yamaha MOX8 boot freeze and distorted sound
                  by maleksa
                  My Yamaha MOX8 synthesizer recently developed two issues.

                  Firstly, after booting up, it operates as normal. However, after about 5 minutes, the sound starts to get distorted (broken up screeching sound) almost like putting it through a guitar distortion pedal. After a while, the distorted sounds will go away for a while and comes back. At times, the synthesizer will also freeze I need to power off and on again.

                  Secondly, when powering off and on again, there will be times where the synthesizer will freeze during the boot sequence (freezes at the MOX8 Opening Screen),...
                  11-07-2024, 03:28 AM
                • Rubenlily
                  Quick question about the ribbon
                  by Rubenlily
                  Hey,

                  So I have horizontal lines on my TV and I'm trying to trouble shoot. My question about the ribbon is:

                  When I disconnect one ribbon from the t-con I should get half picture working and other half black or something like that correct? But when I disconnect the ribbon on one side I just get a dark screen and it doesn't matter what side I disconnect. I just get the dark screen. No half working, no one half black and the other one left. Sound is playing from the TV so it's obviously on and when both sides are connected I have the picture with the horizontal lines...
                  08-17-2023, 11:09 AM
                • Tr0ll
                  T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
                  by Tr0ll
                  Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

                  The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

                  Original T-con:
                  Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

                  First replacement T-con:

                  I thought it might be t-con and ordered new t-con from china(supposedly tested)...
                  10-07-2023, 07:48 PM
                • Scincidae
                  UN70NU6900FXZA Won't Boot Unless I Temporarily Disconnect Right LVDS Ribbon
                  by Scincidae
                  I recently was given a UN70NU6900FXZA that would only boot loop once plugged in (auto powers on when plugged in). I found that disconnecting the lower (right side) LVDS ribbon, then plugging the TV in, followed by reconnecting the lower LVDS ribbon will allow the TV to work 100% normal as far as I can tell (no lines, no discoloration, no dimming or anything like that).

                  I tried the tape method on the lower LVDS ribbon and found that if I cover pins 10 and 11 (counting from the bottom up) allows the TV to boot normal but 25% screen all the way to the right side is discolored. While...
                  04-24-2022, 06:00 PM
                • Loading...
                • No more items.
                Working...