VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

[rebelkustoms]

Re: VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

Here is PS shot.

[budm]

Re: VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

Show us good clear straight shots pictures of the whole bottom side of the power supply board.

[R_J]

Re: VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

The first thing I would do is remove the power supply from the tv and inspect or resolder the connections on the transformers, they like to develop poor connections and go intermittent.
Also check the solder connections on any of the components mounted to the heat sinks .

[rebelkustoms]

Re: VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

Are you getting about 160VDC when measure right between the two legs of main filter cap C2 (no need to turn the TV ON)?

Yea both caps reading about 170V

[budm]

Re: VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

Are you getting about 160VDC when measure right between the two legs of main filter cap C2 (no need to turn the TV ON)?

[rebelkustoms]

Re: VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

Sure, sorry

[budm]

Re: VIZIO D60-F3 Wont Power ON, No Standby, No Picture, No Sound

Can we see the pictures of the whole backside of the TV showing all the boards so we can see how all the boards are connected together?

[rebelkustoms]

Hi all, got a new set to look at. This one is a Vizio D60-F3 it has no standby light, wont power on and has no pi or sound. I have checked continuity in the fuse. I checked the pinouts to the motherboard several times and I am getting no voltage on any of the pins. Guy who gave it to me told me it was turning on then going off and then it stopped coming on. There are pics of the model and powerboard. Thanks