Hi I can not find the EDIT button how can I edit my post? I think I have Edit permission but do not have the button how to do it? thank you
-
Hope someone can give me some suggestions on this because i'm at my wits end with it...
I have an Envy 13-BA1565na here with an Intel Core i7 i7-1165G7 CPU (board is a LA-J475P Rev 1.0) which has an intermittent power button issue. The power button is integrated into the keyboard, and I have ruled out the keyboard, BIOS and battery as being the issue.
Basically, on mains power, the power button works fairly well. The first time you come to it after leving it sitting (either on charge or not on charge), it might take 2 or 3 presses of the button, but then the laptop boots...07-12-2024, 03:03 AM -
Hi all!
I've got an Asus FX517ZC on the bench at the moment and I just can't figure out what's going on with it.
Here are its various numbers and identifiers:
Model short: FX517Z
Model long: FX517ZC-HN114W
SN: NANRCX01S57842E
CN: 3SDB 12M
MFD: 2022-10
Motherboard model: DA0NJLMBAE0 REV E
Symptoms:
The laptop's charge light comes on, but when the power on button is pressed nothing happens. No fan spin, no caps lock, no screen or keyboard backlight, nothing.
History so far:
The... -
Hello,
With the power button connected it either boot loops with the apple logo or no display but the charging meter shows it looping on charging every few seconds.
No corrosion any where!
Tried a replacement power button off ebay and the same.
Very occasionally it will work with the power button connected!
Same results with or without the battery.
Can it be a fault with the Audio board or the mainboard?
The touch Id assembly connects through the Audio board first then to the Mainboard.
Flex... -
I don't know if anyone here has experience with Japanese slot (pachislo) machines, but I sure hope so. I bought this machine last week in semi-working order. It would play and the reels would spin, but the stop buttons would not stop them at all. I found that the high-frequency filtering tantalum capacitor was bad on the reel stop board, along with the fuse being blown. I replaced the fuse and removed the capacitor. I haven't replaced the cap yet because I didn't have one on hand, but it's not necessary for the operation of the machine.
The issue now is the Stop buttons are intermittently... -
- forum postHP 14-bf054sa
LA-F301P Rev 1.0
This laptop came in with a number of minor issues (Screen with black bar and battery that needs replacing). The laptop also had issues relating to salt (water/air) corrosion, having been used near the ocean.
The HDMI port, 2x usb ports and the SD card reader all needed replacement as they had been affected by salty air and only work intermittently. The HDMI port, 2x usb ports and the SD card reader have been replaced and have been checked for (obvious) shorts.
The laptop now fails to turn on (normally)....
Comment