Panasonic TC-P50U50 Mainboard Problem 14 Blinks

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dcapper
    Badcaps Veteran
    • Dec 2013
    • 496
    • Canada
    #1

    Panasonic TC-P50U50 Mainboard Problem 14 Blinks

    I was given a Panasonic TC-P50U50 with 14 blinks. I did all the checks on it and there was no shorts. I reset it holding the power button and tv fired right up. Here's the problem. The only input that is work is the antenna. The HMDI's or the component are not. If I try to scan channels it reboots. Could it just need a firmware update? Or is most likely the mainboard is fried? Also, could someone help me with the suffix please?
    Attached Files
    Last edited by dcapper; 02-13-2020, 12:48 PM.
    Tags: None
    • aaronwt6
      Badcaps Veteran
      • Apr 2013
      • 855
      • US
      #2
      Re: Panasonic TC-P50U50 Mainboard Problem 14 Blinks

      I don't think a firmware update is going to remedy that problem. That board suffix is 'UA'.

      Shopjimmy shows a couple alternatives as compatible. UC and UG.

      https://www.shopjimmy.com/panasonic-...-tc-p50u50.htm

        Comment

        • dcapper
          Badcaps Veteran
          • Dec 2013
          • 496
          • Canada
          #3
          Re: Panasonic TC-P50U50 Mainboard Problem 14 Blinks

          Thank you. I can understand the older shorting points for the suffix. But I have no clue how this one works. There's lots of these boards on eBay. I'll order one.

            Comment

            • dcapper
              Badcaps Veteran
              • Dec 2013
              • 496
              • Canada
              #4
              Re: Panasonic TC-P50U50 Mainboard Problem 14 Blinks

              I ordered one from tv parts today. Got a sweet deal with 2 fedex shipping. Paid $49.01. I'll update once it's installed.

                Comment

                • aaronwt6
                  Badcaps Veteran
                  • Apr 2013
                  • 855
                  • US
                  #5
                  Re: Panasonic TC-P50U50 Mainboard Problem 14 Blinks

                  Good deal! Hoping for a positive update once you get it.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Andre Gilbert
                      Panasonic TC-P55ST50 8 blinks then no blinks
                      by Andre Gilbert
                      Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
                      Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

                      TV Model: Panasonic TC-P55ST50
                      ...
                      1 Photo
                      11-20-2024, 08:52 PM
                    • AquaMan Ua
                      Problem with PANASONIC CF53 laptop after changing BIOS settings
                      by AquaMan Ua
                      Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
                      2
                      2 Photos
                      05-17-2025, 09:40 AM
                    • Malva
                      Problem LG 49UB850V (Mainboard: EAX65684604 / EBT62954607)
                      by Malva
                      Hi everyone,
                      I'm trying to repair my LG 49UB850V TV (WebOS 1.0, UHD model from 2014).
                      Mainboard model: EAX65684604
                      PCB marking: EBT62954607
                      SPI chip: Winbond W25X20CLNIG Problem description:


                      Originally, the TV would turn on (backlight and LED OK if I force them on), but it shut down as soon as any input was received from the IR sensor or remote. The backlight and power board were working fine.

                      After testing and verifying the voltages (DRY ON, PWR ON, 12V/24V rails), I suspected a corrupted SPI firmware. What I tried so far:
                      • I bought another
                      ...
                      06-25-2025, 02:07 PM
                    • hugocarmo
                      Panasonic TX-24A1UN CRT Sound and Input problem.
                      by hugocarmo
                      Hi.

                      I´ve been given an old CRT from Panasonic, it´s almost new, it was storaged and almost not used since bought.
                      It is imaculate inside, almost no dust or debris inside.
                      The picture is good, but I have no left sound channel, I tried all the inputs, outputs, even on headphone jack. In AV2 I hear sound from right channel but no image, on tv tuner only right sound channel, the same for AV1.
                      So I started to look for a service manual, I found one, and started from the beginning.
                      Most of the times the caps are the problem so I orderer all the caps for all boards,...
                      04-26-2025, 07:45 PM
                    • micsa84
                      Mainboard problem Laptop Lenovo Ideapad 3 15ada05
                      by micsa84
                      Hello! I have a problem with a mainboard from a Lenovo Ideapad 3 15ada05.
                      The problem is that the cooling fan is always on full speed, It doesn't recognize the battery and it is not charging it and the keyboard has only partial functionality, many of the keys don't work.
                      I tried a new bios update but that didn't changed anything.
                      What could be the problem with it?
                      08-15-2023, 10:46 AM
                    • Loading...
                    • No more items.
                    Working...