Re: Sony Kdl-60ex645 bad LED how to use dummy load to trick it?
That one claims 0-999mA: https://www.aliexpress.com/item/3299...chweb201603_55
That one claims 0-999mA: https://www.aliexpress.com/item/3299...chweb201603_55
-
Last edited by nomoresonys; 11-13-2019, 06:46 AM. -
Re: Sony Kdl-60ex645 bad LED how to use dummy load to trick it?
Fine print shows " Iout: 0-150mA(Automatic + Adjustable)"Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Sony Kdl-60ex645 bad LED how to use dummy load to trick it?
I read it, right below that says 0-999.Comment
-
Re: Sony Kdl-60ex645 bad LED how to use dummy load to trick it?
But if you look at the Input power of only 50VA, so 330v @ 1A will be 330W of power, box is too small to be able to deliver that much power.
The other one in your other link (https://www.aliexpress.com/item/3285...5c24401b25ceO9) at least does show 90W (300V @300mA = 90W.
Beside "Constant Current Board Testing Current: 0-999mA" What does that means when the Iout is stated @ 150mA,it is just another Chinese spec to sell the products.
Follow-up: if you look at the bottom of the page, you will have to use External Constant current board to supply that 999mA, and I do not know why it also shows you have to power up your TV power supply.
Also at 330V with Iout rating of 150mA = 49.50W.Attached Filesif you find these attachements useful please consider making a small donation to the site
Last edited by budm; 11-13-2019, 11:26 AM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
-
Re: Sony Kdl-60ex645 bad LED how to use dummy load to trick it?
This is one of the reviews "The device works but the maximum current of 150 Ma does not yield in the entire voltage range. At a load voltage of 80 volts, the maximum current issued by the device is 82ma.Comment
-
Re: Sony Kdl-60ex645 bad LED how to use dummy load to trick it?
I never believe any of these Chinese spec until I can actually test them. If you look at the TV LED driver power supply section you will see how big they are to be able to drive at that spec, so looking at the size of these boxes, no way it can deliver what they are claiming.Last edited by budm; 11-13-2019, 11:29 AM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Sony Kdl-60ex645 bad LED how to use dummy load to trick it?
Right bud, I thought it was too good to be true, just more inflated specs and lies from the chinese.Comment
-
Hi Folks,
Just wanted to clear up a misunderstanding of mine (or what I expect is one). Isn't the 12V rail from the 24 pin, EPS and PCIE separated? IE if I put a power resistor on the ATX 12V pin that is not going to load, thus tell me if the EPS or PCIE rails are fine?
I was recently watching ArIs from Hardware Busters video on how to properly test ATX PSUs without using 5 figure Croma substations.
The PCB adapter he used breaks out the 12, 5 and 3.3V pins from the 24 pin and gives you banana plugs to connect to. That is a bit useless is it not? Aren't... -
Buenas mi nombre es carlos me uni al foro porque estoy buscando el schematic de una sony vaio pcg-41217u otras formas de escribirlo son 1p-0117j01-a012 mbx-237 numero de placa revision 1.2 o Sony VPCSB (MBX-237), en fin me gustaria y ayudaria un monton si alguien me puede dar dichi svhematic para hacer las mediciones de una laptop de la mencionada anteriormente(Sony VAIO PCG-41217U) con el fin de repararla dejo de funcionar solo prende el led de la bateria al pulsar el boton de power el disco empiesa a hacer ruido de actividad pero los leds del frontas no reflejan acividad y no enciende la pantalla.... -
This specification for the HP Elite Slice G2 + Image Load & Asset Tag can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Elite Slice G2 + Image Load & Asset Tag boardview and Elite Slice G2 + Image Load & Asset Tag schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...09-12-2024, 02:20 PM
-
This specification for the HP ProBook 430 G6 + Image Load, Asset Tag & Testntag Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 430 G6 + Image Load, Asset Tag & Testntag boardview and 430 G6 + Image Load, Asset Tag & Testntag schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps...09-06-2024, 10:56 AM
-
This specification for the HP EliteBook 1050 G1 + Image Load & Asset Tag Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 1050 G1 + Image Load & Asset Tag boardview and 1050 G1 + Image Load & Asset Tag schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that...09-06-2024, 10:56 AM
Comment