campomatic tv secret service menu

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Alimash
    Member
    • Jul 2019
    • 31
    • Lebanon

    #1

    campomatic tv secret service menu

    Hi guys
    i got a campomatic led tv labeled "32s1j" which have a back light problem: no back light.
    i opened it and did some voltage test ,the led driver deliver only 26 v which means that one led or more is fried.
    There is two led strips and each one contain six leds.
    i changed the fried led and reconnect the two strips and the problem were fixed, the led driver now deliver 70 volt when i press the power button and 26 v in standby button.
    i turn the tv on for three hours, after the led strip fried again!!
    My assumption is that the current delivered by the driver is to much for the led which caused them to fry(the led strips are not the original ones,they were changed by another shop before i got the tv)
    To solve the problem a friend of mine told me that i should access the tv secret service menu to change the brightness of the tv which decrease the current and increase the leds life if that make any sense ??
    But i don't know how to do that :-(
  • dick_barton
    Badcaps Legend
    • Aug 2015
    • 6643
    • Wales

    #2
    Re: campomatic tv secret service menu

    You may be able to turn down the backlight using the On Screen Menu. It's the backlight you need to turn down as low as possible to reduce the strain on the leds and not the brightness.
    Willing to help but I'm no expert.

    Comment

    • Alimash
      Member
      • Jul 2019
      • 31
      • Lebanon

      #3
      Re: campomatic tv secret service menu

      Originally posted by dick_barton
      You may be able to turn down the backlight using the On Screen Menu. It's the backlight you need to turn down as low as possible to reduce the strain on the leds and not the brightness.
      Thanks dick
      but i have been told by an expert that the on screen menu is not the solution
      i need to press a combination of buttons to enter another menu.
      this link show what i mean
      https://www.askvg.com/secret-service...ony-and-lg-tv/

      Comment

      • Andrew F. Ali
        Badcaps Legend
        • Jan 2014
        • 2450
        • Trinidad & Tobago

        #4
        Re: campomatic tv secret service menu

        I have found that if Backlights strips go bad and you have to open the Panel, then replace ALL the Backlight strips with new strips. Repairing strips by replacing just the bad LED WILL fail again as the other LEDs would have taken some strain already. If you are changing ALL the LEDs on EACH strip that is fine dick_barton is correct when he advised to go into the Menu and reduce the backlight setting. Some TVs you can do it from the User Menu and some TVs you would have to go into the Service Menu by pressing a combination of buttons to access the Backlight setting.

        Comment

        • Alimash
          Member
          • Jul 2019
          • 31
          • Lebanon

          #5
          Re: campomatic tv secret service menu

          Ok guys
          I will try that

          Comment

          Related Topics

          Collapse

          • Document Archive
            LCD LED TV Service Menu Codes
            by Document Archive
            ALL LCD LED TV SERVICE MENU CODES

            Service Menu Code with Board Name

            China Universal Board / Jumper Board Service Menu Code
            Changhong Ruba Service Menu Code
            Ecostar LED TV Service Menu Code
            Orient LED TV Service Menu Code
            Haier LED TV Service Menu Code
            TCL LED TV Service Menu Code
            Samsung LED TV Service Menu Code
            LG LED TV Service Menu Code
            Videocon LED TV Service Menu Code
            Supra LED TV Service Menu Code
            Toshiba LED TV Service Menu Code
            Symphony LED TV Service Menu Code
            Veste/ LED TV Service Menu Code...
            10-31-2024, 03:58 AM
          • Robby-Gr
            TV Samsung UE55HU8500L (2014) – service menu + firmware reflashing advice needed
            by Robby-Gr
            Hi all,

            I’m trying to recover a Samsung UE55HU8500L (curved UHD, 4K model from 2014) after replacing the panel. The new panel is a 55A1UU8EH, which produces excellent image quality — very close to the original.

            However, since the swap, the TV enters a boot loop (Samsung logo → restart) unless I enter the service menu and perform a reset.

            The service mode had been previously modified — possibly by a technician or during the panel swap — and I suspect some key settings are mismatched for the European (Greece) market.

            Additional issues:...
            09-27-2025, 12:02 AM
          • tusiime
            How to access Vizio m652i-b2 service menu
            by tusiime
            The current main board on my Vizio m652i-b2 only has 1 of 4 HDMI ports working. Also, the coaxial port is not working.

            So I ordered a replacement board. It boots up the tv, but the display is dark in areas, colors are off, etc. I have seen information online that a setting in the service menu may need to be adjusted. Have tried many ways to access the service menu using remote codes, but none work.

            Can someone here provide the confirmed method for accessing the service menu on this tv? Thanks in advance!
            09-15-2023, 09:57 AM
          • intercepter
            JVC LT-32CA120 service menu
            by intercepter
            Hi,
            I have JVC LT-32CA120
            Board:Vestel 17MB171
            I need rotate screen.It is possible in service menu and how to enter service menu?
            Thanks.
            12-10-2024, 10:29 AM
          • alltvrepairs
            Jvc Lt-65VU3000 reduce backlight from service menu
            by alltvrepairs
            Hi,
            I have just replaced led set of this vestel tv due to age.
            I would like to reduce backlight from service mode. I have tried menu 4725 but in the menu i can't change anything.


            Any help pls? I don't want to change from electronics inverter feedback resistor ideally.
            Thanks again....
            09-20-2025, 05:03 AM
          • Loading...
          • No more items.
          Working...