So I have an LG 55UH6090 where the backlights faded over time and progressively become bluer, I adjusted for this but ultimately knew that I would be replacing the backlights.
So I tore the TV down to the backlights (I could see that the actual lights were blue) and things were going well, I have the correct backlight replacement strips. and...
How do I get the bloody wiring harness off the strip. I've watched the shopjimmy videos and he just like wiggles it a little and it comes off effortlessly. I've depressed what looks like a retaining tab down and even tried squezzing it, and I've wiggled a little with needle nose pliers even but I can't it to budge. So obviously i'm missing the trick here.
I'm not seeing what it is that I'm supposed to be depressing to get these to release, i had to walk away from it before I just conan'd these things apart
So I tore the TV down to the backlights (I could see that the actual lights were blue) and things were going well, I have the correct backlight replacement strips. and...
How do I get the bloody wiring harness off the strip. I've watched the shopjimmy videos and he just like wiggles it a little and it comes off effortlessly. I've depressed what looks like a retaining tab down and even tried squezzing it, and I've wiggled a little with needle nose pliers even but I can't it to budge. So obviously i'm missing the trick here.
I'm not seeing what it is that I'm supposed to be depressing to get these to release, i had to walk away from it before I just conan'd these things apart
Attached Files
Comment