hello cotech anyone have firwamre for sharp lc 40le380x, can you give me?
thanks Herbert.
thanks Herbert.
-
-
-
Re: Need Firmware Sharp LC 40LE380X
Dear sir,
Required Firmware For sharp tv Model. LC40LE380X please help me sir.
Thanks,MichaelComment
-
Re: Need Firmware Sharp LC 40LE380X
Did you try updating online thru ethernet?Comment
-
Re: Need Firmware Sharp LC 40LE380X
Yes sir it is showing not available new upadateComment
-
Re: Need Firmware Sharp LC 40LE380X
I buy this tv @2017Comment
-
Re: Need Firmware Sharp LC 40LE380X
Maybe contact sharp, tell them you need the firmware, tv is only 3 years old, they should have the firmware available on their site but I don't see it, maybe tell them if you can't get a simple firmware then you don't see any reason to buy their products in the future.Comment
-
Hi.
Please if someone help me with a functional firmware dump for this KD186 QKITPD186WJN3 (WE015169S) motherboard from TV SHARP LC-26P50E.
I think this motherboard it is found in several models.
What I need is firmware for the NOR chip SST39VF1682 (IC2003) and for the two EEPROMs 24C64 (IC2002) and 24C32 (IC4501).
I am especially interested in the NOR firmware because I think it has problems.
The TV initially came only with the red STB LED on and it did not respond to any commands.
I checked the power supply...07-11-2022, 10:07 AM -
SHARP
Model -50FN4EA
Chassis:-4T-C50FN4EL2AB
Main board-T.MT9685.716
Need firmware,get to the logo and then restarted.
-
Hello,
I am looking / wondering if anyone knows where a good firmware download link is for a LC-60LE640U, the sharp support sight says the screen is archived but offers no links.
I see backlite is active,
but I cannot get the screen to return back to menus , etc
This is all after replacing the mainboard...
any assistance is greatly appreciated. -
Hello to everyone ,
This is my first post here, and i would like to share with you a small story in case you can help me.
Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.
All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work
I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...02-10-2024, 02:07 PM -
Hi guys.
I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.
So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
Got New chip and writes good.
THE PROBLEM...
It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.
Does anyone have a Good Firmware I can have?...
Comment