Epson 5020UB Projector - Temp and Lamp Light Flashing

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • hardbox
    Member
    • Sep 2013
    • 22
    • USA
    #1

    Epson 5020UB Projector - Temp and Lamp Light Flashing

    Need some idea of where to start to fix this projector. According to the user manual, when the temp and lamp lights are flashing there is an internal problem which doesn't give me much to work with. Need some input. The fans run for like two seconds when attempting to turn on then goes straight to the error code. Since it's not a lamp, fan or temp error, I'm leaning towards the power supply.

    https://www.manualslib.com/manual/74...page=80#manual
    Last edited by hardbox; 06-24-2019, 01:01 PM.
    Tags: None
    • diif
      Badcaps Legend
      • Feb 2014
      • 6978
      • England
      #2
      Re: Epson 5020UB Projector - Temp and Lamp Light Flashing

      Some photos will help.

        Comment

        • petehall347
          Badcaps Legend
          • Jan 2015
          • 4422
          • United Kingdom
          #3
          Re: Epson 5020UB Projector - Temp and Lamp Light Flashing

          i had something much the same with mine that had been stored in bad conditions and working previously . thought it was going to be a supply capacitor but wasn't .. i pulled all boards and gave them a good scrub with hot soapy water and paint brush concentrating on ic pins . rinsed with clean then iso washed and blow dried . that fixed the corrosion issue .and its still working .

            Comment

            • Chillin_one79
              New Member
              • Sep 2019
              • 1
              • US
              #4
              Re: Epson 5020UB Projector - Temp and Lamp Light Flashing

              Originally posted by hardbox
              Need some idea of where to start to fix this projector. According to the user manual, when the temp and lamp lights are flashing there is an internal problem which doesn't give me much to work with. Need some input. The fans run for like two seconds when attempting to turn on then goes straight to the error code. Since it's not a lamp, fan or temp error, I'm leaning towards the power supply.

              https://www.manualslib.com/manual/74...page=80#manual
              Did you ever figure out what the issue was with your projector? I'm experiencing the same thing with a 6010. I'm wondering if it is the lamp ballast....

                Comment

                Previous template Next

                Related Topics

                Collapse
                • platinumsteel
                  Epson VS250 Projector Lamp Not Working.
                  by platinumsteel
                  Hi guys gooday i have a Epson VS250 Projector that turns on and is also being recognized and detected by the computer when i plug the hdmi cable.The only issue the projector lamp is not working .Are these lamps repairable ? Or i should just forget repairing the lamp and just buy a replacement. Thanks...
                  04-09-2023, 04:03 PM
                • narf
                  Epson EB-U42 projector / Caps with 0.7 ohms ?!
                  by narf
                  hi all,

                  first of all: i'm a (motivated) newbie, so please forgive me any stupid question i may or may not ask

                  i'm currently repairing a projector: Epson EB-U42 that doesn't start (no lights, nothing).

                  what i've found so far:
                  - the PSU does its job and supplies 12V to the mainboard via the connector.
                  - shortly thereafter, there is a mosfet (TS420-600B) where i can test 12V on the one side (in the data sheet this side is called Anode), Gate 0V, Kathode shorted to ground
                  - not far away, there's the first cap with a resistance of 0.7 ohms....
                  07-02-2024, 03:53 PM
                • STKR123
                  Elitebooks (820, 840 etc. all gens) and those continuously flashing Power LED + flashing CapsLock LED
                  by STKR123
                  As the Elitebooks (820, 840 all gens) only show flashing Power LED and flashing CapsLock (continuously) + a very soft "ticking" noise near the DC Jack,
                  I wonder if re-flashing the BIOS might be of any use here.

                  As far as I understood, steady flashing either means insufficient power or a CPU/GPU/Motherboard issue. I use the original 65watt power supply.

                  There are so many threads out there, but most of the solutions involve flashing codes, which I dont have or claim that you MUST use the original power supply, do a hard reset, reseat the RAM, clean the RAM,...
                  11-03-2024, 06:58 AM
                • vestaviascott
                  Epson 5040UB Projector No Lamp Strike Stuck in Startup - Blinking Status/Lamp Lights
                  by vestaviascott
                  Hoping someone here can put me on the right track. I'm trying to troubleshoot/flowchart the "internal projector error" on my newly acquired Facebook Marketplace bought Epson 5040UB projector (3LED, not DLP). Owner said it needed new lamp, actually error code blink pattern indicates "Internal Projector Error, call Epson support". Unit is out of warranty as of 8/19

                  Here's what happens:

                  1) Power on
                  2) Blue power indicator lights and the lens cover motor opens the lens cover, light fan noise heard
                  3) Blue status light flashes for appx 4 minutes...
                  07-29-2020, 06:08 AM
                • magnetepazzo
                  epson emp-x52 projector lamp temp fail
                  by magnetepazzo
                  Hi Guys i have this projector emp-x52 when power on the fan spin and lamp go on but after few seconds lamp go off and led temp flashing with fan at maximum speed. I have check the 2 termal temp but are good are 12.51 Kohm. Have suggestion for me ? TKS
                  04-23-2021, 03:37 AM
                • Loading...
                • No more items.
                Working...