I received this TV yesterday First time turning it on I saw this Sony start up screen then it disappeared for flashing lights read four times. Ran a rest to green light turned back on had a Sony startup screen the beige screen but the Sony word was jettering up and down then it turned off. Now just back lights on and sound.
-
-
Re: SONY XBR65x900E no image
1- you have double post for the info
2- since this is android system first things you need to to do hard reset, how to
plug it out from wall socket first, press on the TV side panel power and volum- minus keep them pressed then plug it in wall socket, the LED indicator will change from white to Green , release the 2 button .. give it time around 30 minute as it will restart 2 time and make new install , in case still no image you should hear the first install music sound stable after this 30 minute or less waiting time.. report your result -
Re: SONY XBR65x900E no image
Ok thanks just did will let you knowComment
-
Re: SONY XBR65x900E no image
Am I supposed to hear music first 3 min? Unplug tv from outlet held start and volume down same time green light came on and in 3 min started hearing music. Indicator light is white with musicLast edited by charlie555; 04-17-2019, 05:33 PM.Comment
-
Re: SONY XBR65x900E no image
These are pic from the tcon board is this normal?Attached FilesComment
-
-
Re: SONY XBR65x900E no image
this look not good, before you spend on this set by replacing T-CON inspect the panel bonds they may also toasted .
about hard reset. it mean this set was rested before and its on first install menu music,Comment
-
Re: SONY XBR65x900E no image
Thank you will Order and check before installing tcon board.Comment
-
Re: SONY XBR65x900E no image
Replaced tcon , no changeComment
-
Hello,
at tv KD - 65XF9005 i have a problem.
Afrer a coupe of minutes (10-30) i got black screen, no image. But i have sound.
is this a common problem for this tv?
i attached pictures of inside. Supply board looks okey, no blowed caps.... -
This specification for the HP Elite Slice G2 + Image Load & Asset Tag can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Elite Slice G2 + Image Load & Asset Tag boardview and Elite Slice G2 + Image Load & Asset Tag schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...09-12-2024, 02:20 PM
-
Hi all, I recently picked up a Sony KV-XJ29M31 CRT TV (BG3R chassis, Australian model) cheaply & completed the RGB mux mod on it for some retro gaming. That worked great, however, I have another problem which I hope someone can help me with or at least steer me in the right direction.
Basically, the issue is when it's cold, it takes a while (like 2 mins) for the picture to come up. I think the image is there, it's just very dark or dim. I can hear the degaussing sound & I can change inputs & hear audio but no image.
Once it's running properly, it keeps... -
I just got this today and it has the infamous 6 blink code. I've read it's quite possibly bad backlights, and I intend to check them soon. However, I was just curious if the Sony logo should it's shouldn't be appearing briefly between powering on and the light starts flashing. I've read at least one other person had the logo flash quickly, but mine does not show anything at all, not even a flicker. The green light comes on and after about 5 seconds the red light flashes. So I'd expect in this 5 seconds to see the logo. This leads me to believe it could be a power supply issue.
I... -
I have a 2019 75" x950g, and while playing a movie, the screen suddenly went dark in a weird way, where it faded towards one corner into being fully black. Now the TV turns on, and the backlight comes on, but there is nothing displayed except black. Sound still comes through the TV speakers, and i have tried doing a hard reset using the volume - and power buttons while plugging the display back in, but it did not fix it. I can confirm that pressing buttons on my remote is still doing "something" because I'm hearing sound still, even though the screen is black.
Does...
Comment