Re: Sony KDL70W850
Disconnect one of the ribbon cables from panel board to tcon board then check for image then the other side.
charlie555
Senior Member
Last Activity: 04-05-2025, 11:48 AM
Joined: 02-17-2018
Location: texas
-
Re: SAMSUNG UN70TU7000F no image
Ok thank you nomoresonys sent a link will check it out. Thanks guysLeave a comment:
-
Re: SAMSUNG UN70TU7000F no image
Here are pics of the boards...Leave a comment:
-
Re: SAMSUNG UN70TU7000F no image
I'm new to this can't find the edit and every time I try to load all the pic only one shows.Leave a comment:
-
SAMSUNG UN70TU7000F no image
This tv has no image, but does have sound and backlights, when I remove the cable between the ps and main board I have lights. And main board to the panel driver board It goes dim. I did notice the two other panel boards on the edges left and right if I remove the jumpers from the center board the backlights stay on if I connect the jumper the tv goes dim and flickers and 2 red blinks. Need help -
Re: Sony xbr65x900c sound yes, no backlight or image.
So you turn on the tv and comes up to 4 little images and then shuts off then 4 read blinks?Leave a comment:
-
Re: Sony XBR-55A9G & Sony XBR-55A8G
may I have the materials for XBR55A9G?Leave a comment:
-
Re: Xbr65x900c
so sony finally came through and replaced main bd for free up and running now. extended warranty ends Dec 30th.Leave a comment:
-
Re: Hisense 50K360G
ok here my tv I picked up, mine has the same code 7-3. I did a hard reset and the whole screen worked perfect. so I began to hook up a roku device and then that's when it screen started back to flickering on and off again . On the power supply there are 2 pins that's supposed to have 14 v but I'm getting 17v. any suggestions?...Leave a comment:
-
Re: Vizio V705-G1 no power
replace it sensor board and ribbon cable. fixedLeave a comment:
-
Re: Vizio V705-G1 no power
so I replaced ps and the it sensor board and ribbon cable got very hot. storm took out it board also?Leave a comment:
-
Vizio V705-G1 no power
picked up this tv. The guy said storm killed it. I checked power supply and many of the components failed testing and also no sound with new power supply but I am getting power to main board. I'm wondering if I received a bad power supply because no standby light. -
-
Samsung UN60F6350AF red pixel stuck
Pixel line stuck, shows in front of menu.... -
Re: Samsung UN40D6000SF
when you say the edge , left edge or right?Leave a comment:
-
Re: Samsung UN40D6000SF
TyLeave a comment:
-
Re: Samsung UN40D6000SF
last pic is with the screen facing down and the right side ribbon cable in place with slite pressure on the the latch....Leave a comment:
-
Re: Samsung UN40D6000SF
Ok will try, tyLeave a comment:
-
Re: Samsung UN40D6000SF
Ok, so with the panel face down, unplugged right side, left side looks good. Switched and bad on the other. Tape on which end and how many pins should be covered.Leave a comment:
-
No activity results to display
Leave a comment: