Need bin file for SHARP LC-24LE175M

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • yobbgsm
    Senior Member
    • May 2017
    • 63
    • USA
    #1

    Need bin file for SHARP LC-24LE175M

    Hi,

    Can someone upload this for me please? I found in other forums but I can't register.

    Need bin file for SHARP LC-24LE175M

    The error I am getting, showing:

    K- 24 Alpaca MM
    HDMI 0
    USB 0

    Can no longer use inputs, cannot service mode tru remote and buttons. (joystick type).

    Thank you.
    Last edited by yobbgsm; 01-15-2019, 06:52 PM.
    Tags: None
    • anna1203
      New Member
      • Mar 2019
      • 4
      • dasdasdasdas
      #2
      Re: Need bin file for SHARP LC-24LE175M

      wooowww!! still looking to bro can you help me

        Comment

        Previous template Next

        Related Topics

        Collapse
        • m1ch43lzm
          Notice to users of XGecu TL866II Plus / T48 / T56 / T76 programmers regarding BIOS backup file size
          by m1ch43lzm
          Hi everyone
          I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
          Programmer models: XGecu TL866II Plus / T48 / T56 / T76

          Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
          There's also an extra OTP Secu.R...
          09-06-2025, 05:47 PM
        • Forest79
          Lenovo ThinkStation P520 BIOS file needed
          by Forest79
          Hello,

          I got a Lenovo ThinkStation P520 (Type 30BF) from a friend, asking me for a repair. Windows 11 offered a firmware upgrade as an optional update, and it failed.
          The emergency flash procedure from the hardware manual has also failed. So, I asked an acquaintance with better skills to flash the BIOS directly.

          However, the chip (a Macronix MX25L25673GMI-08G) has a size of 32 MB, and the BIOS file from the Lenovo website (extracted with UEFITool) has a little more than 16 MB. Thus, the software my acquaintance used (SiberiaProg v1.45, with a CH341A Programmer)...
          07-23-2023, 07:39 AM
        • Citymin
          NT955XED (Samsung Galaxy Book2 Pro - 15.6) BIOS dump file Request
          by Citymin
          Hi all,

          My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
          The charging red LED lights up, but the charging screen doesn't show any indication.
          When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
          (I've tried removing the battery and resetting the device, but the issue persists.)

          NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
          PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
          S/N : 5RNK9FFT70...
          08-05-2025, 05:12 AM
        • DRIFT-O-MATIC
          Sharp LC-40LE431U Manual control buttons not working properly
          by DRIFT-O-MATIC
          I have a Sharp LC-40LE431U TV. The symptoms are when plugged in, the control buttons on the right side panel don't seem to want to work correctly. I get a solid red light. But when I press the Power button, it does not power on immediately. I have to keep pressing ALL the side buttons randomly until finally the solid green light is on. Then when pressing each additional button, they do not always respond correctly, if at all. Pressing the Volume button might bring up the Menu, or vise versa. Even if I can get the Menu screen to come up and scroll through the selections, I still cannot select any...
          02-14-2022, 04:24 AM
        • Sus256
          HISENSE 65E7KQ PRO - no boot
          by Sus256
          Hi all!

          HISENSE 65E7KQ PRO
          RSAG7.820.13512 - chassis
          MT9618BAATAB - cpu
          RSAG7.820.12059 - power
          HD650Y3U77 - panel
          KLM8G1GETF - emmc

          The TV does not turn on, the standby indicator is on. All voltages are present.
          Emms is dead. Not readable, not detected.
          Replaced emmc.
          But with another dump there is no launch

          Terminal log

          UART
          <
          AC_ON
          RPMB key is not yet programmed

          HASH1_VERSION=0x00000000 64bit
          E-B
          FDE enabled
          layout pattern onebin by SAR7,0...
          06-01-2025, 02:11 AM
        • Loading...
        • No more items.
        Working...