Re: Acer ES1-132 C30B bios password
@onizzbox
Thanks sir, I already unlock using the site above.
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Acer ES1-132 C30B bios password
HI SMDFlea,
This site code calculator looks great. My code works here and I was now able to access the bios.
[url]https://bios-pw.org/[/url]
[url]https://bios-pw.org/[/url]
Thank you.Re: Acer ES1-132 C30B bios password<.../> Thank you.Re: Acer ES1-132...
Leave a comment:
-
Re: Acer ES1-132 C30B bios password
Thank you sir. I tried to calculate the code 71802473 and the result is:
f2fc129a0a428dbc
But seems the character is limited in this model.
I will back up the bios. Thank you for your help....
Leave a comment:
-
Acer ES1-132 C30B bios password
Hi,
Does flashing the bios of Acer ES1-132 removes the password? Unit has bios password so there is no way to do a reset on it's OS. Windows 10 has password too, resetting by doing Alt+F10 requires more space since it's just 32 emmc storage. I already done disconnecting the cmos battery and the battery itself for an hour but no go. It provides a password code after 3 hits but it does help either. Any thoughts?
I have RT809F flasher.
Thank you.
-
Re: Eeprom dump thread!
Can someone share Skyworth 32A3 board TP.V56T.PB723
Thanks.
Leave a comment:
-
Sharp TV LC-32LE267M firmware
Hi Mate,
Can someone share your backup firmware or bin file for Sharp 32″ LED HD TV LC-32LE267M. It's blinking red light.
TIA.
-
Re: Haier HKL-500201 power board
I got this resolved using MUR460 Diode 600V 4A.
Leave a comment:
-
Haier HKL-500201 power board
Hi Guys,
Just checking if someone has an extra board (Haier TV HKL-500201) for this and check the value of D6? That part gets hot and looks like burnt.
Pic for reference.
TIA...
-
Re: Samsung 39 LCD TV no light
Thanks guys I was able to resolved this issue. It's the backlight I changed all the beads.
Leave a comment:
-
Re: Samsung 39 LCD TV no light
Its a Octal, 8-Bit Voltage Out DAC, not sure if that is related to the LED supply?
Thanks.
Leave a comment:
-
Re: Samsung 39 LCD TV no light
I tested the LEDs using my backlight tester. All strips / led are good prior to installing. IC appears 421 3013x 8609. That's the marking.
Leave a comment:
-
Re: Samsung 39 LCD TV no light
Hi diif,
I used same 3v led, 3528 2835 1W. There is an a 8 leg IC close to CNL802, I am wondering if that is a led driver IC?
[url]https://www.badcaps.net/forum/attachment.php?attachmentid=166221&d=1510788361[/url]Re: Samsung 39 LCD TV no light<br />...166221&d=15107...
Leave a comment:
-
Re: Samsung 39 LCD TV no light
What's the fix?? That post was not fix. Same here I replaced the leds but it keep on blowing up......
Leave a comment:
-
Re: Samsung 39 LCD TV no light
Yes, same as mentioned above. Sometimes 206V or 210v. As quoted below.
[I][COLOR="Red"]
"I have voltage only on 1 - D+ and 2 D+, When i switch the tv on voltage goes up to 221 the comes down to 218 on these two connections. I have no voltages on other pins."[/COLOR][/I]Re: Samsung 39 LCD TV no light
Yes, same as mentioned above. Sometimes 206V or 210v. As quoted below.
[I][COLOR="Red"]
"I have voltage only on 1 - D+ and 2 D+, When i switch the tv on voltage goes up to 221
Leave a comment:
-
Samsung 39 LCD TV no light
I have an exactly the same issue with this post, any idea please?
[url]https://www.badcaps.net/forum/showpost.php?p=849539&postcount=19[/url]https://I have an exactly the same i...count=19[/url]
-
Re: Samsung tv no backlight
I have the same issue, I already replaced all busted back light but still no light and red blinking. I replaced the 1 ohm resistor near pin1 D+, I thought that was the issue since it looks open, but still no light on display. Any other suggestions?
Leave a comment:
-
Need bin file for SHARP LC-24LE175M
Hi,
Can someone upload this for me please? I found in other forums but I can't register.
Need bin file for SHARP LC-24LE175M
The error I am getting, showing:
K- 24 Alpaca MM
HDMI 0
USB 0
Can no longer use inputs, cannot service mode tru remote and buttons. (joystick type).
Thank you.Last edited by yobbgsm; 01-15-2019, 06:52 PM.
-
Toshiba 23PU200EP slow boot
Hi Mates,
Anyone has a bin file for this model Toshiba 23PU200EP. The problem is, it takes around 10 to 15 seconds for the tv to boot or show it's display. I inspect the power supply board and system board but looks fine. I was wondering if it may cause by it's firmware? Any thoughts is very much appreciated.
-
Re: Lenovo Thinkpad X1 Carbon password
Will look at this, thank you so much....
Leave a comment:
-
Lenovo Thinkpad X1 Carbon password
Hi Mates,
Is it doable to bypass or removed the power on password (Supervisor Password) by re-flashing bios for Lenovo Thinkpad 3rd gen? Someone left this unit in a cab, as per customer. The passenger didn't contact anymore.
If it is doable can someone share a dump file please? I have a Rt809 programmer.
TIA.Last edited by yobbgsm; 07-09-2018, 03:18 AM.
No activity results to display
Show More
Leave a comment: