Announcement

Collapse
No announcement yet.

Samsung Plasma pn60f8500afxza

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Samsung Plasma pn60f8500afxza

    I have a Samsung Plasma pn60f8500afxza that the HDMI stopped working, I have been using the WiFi and Component connections to be able to use it. I felt it was time to try to get it repaired. I saw the posts about replacing the chip to get the HDMI working but I feel my stills are not at that level. I ordered a replacement main board (Bn94-06205b) that was stated to be New from Ebay. After installed the new board I am getting the 5 blink codes from the board and the screen does not energize. I installed the old board and the TV starts right up. I tried to load Firmware from USB but after it blinks for a moment accessing the USB it the USB just stays lit and stops flash. Let is sit for an hour and no change. Any ideas on this new board what could be going on?

    The Original board has the bardcode sticker on it

    https://ibb.co/VYdLNmg
    Tags: None
    #2
    Re: Samsung Plasma pn60f8500afxza

    You need to match the numbers on the white sticker, the board you received could be bad or is for a different panel.
    If the sticker is missing who knows what its from, and what it's for.
    Last edited by R_J; 01-09-2019, 11:21 AM.

    Comment

      #3
      Re: Samsung Plasma pn60f8500afxza

      Okay thanks, I will see if I can go back and sort it out with the seller.

      Comment

      Previous template Next
      Working...
      X