40E200U1 - Anyone need these boards?

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • JayArr_BC
    Senior Member
    • Jun 2012
    • 65
    • Canada
    #1

    40E200U1 - Anyone need these boards?

    Hi All

    Customer refused quote and abandoned it.

    It flashes a picture with channel graphics then goes black. Already changed the SEM IC on the inverter board. Figure the lamps are bad.

    Does anyone need/want any of the boards? LMK I'll ship them to you for free if you can use them, I hate to throw working boards in the dump.
    Tags: None
    • Andrew F. Ali
      Badcaps Legend
      • Jan 2014
      • 2450
      • Trinidad & Tobago
      #2
      Re: 40E200U1 - Anyone need these boards?

      Put them up for sale on e-bay.

        Comment

        • JayArr_BC
          Senior Member
          • Jun 2012
          • 65
          • Canada
          #3
          Re: 40E200U1 - Anyone need these boards?

          I really can't be bothered with eBay anymore. I buy from eBay almost everyday but the level of beauracracy to sell on eBay is prohibitive. By the time I take pics, post up, deal with the lowballers, accept a bid and then pack and ship it I make very little and if they have a complaint I lose $$. Just not worth it.

          You have to agree to give them the right to raid your bank account or credit card if there is a problem and they think someone deserves a refund. They also insist that you agree to give up all of your rights to sue or use any other method than eBay to resolve disputes. In the end you make very little if everything goes right and one out of ten is a scammer that chews up your time to nullify the profit on the other nine. I shut down my eBay store 18 months ago and sales are up about 15%, I think it's partly because I'm not wasting time trying to sell stuff and instead I'm repairing.

          If you would like to sell them on eBay just send me your address and I'll throw the boards in a box and mail them to you absolutely free. I'm willing to spend 15 minutes pulling the boards and shipping them for nothing more than good karma.

          JayArr

            Comment

            • nomoresonys
              Badcaps Legend
              • Jan 2013
              • 12156
              • U.S.
              #4
              Re: 40E200U1 - Anyone need these boards?

              I agree completely, your description of ebay is right on.

                Comment

                • jjanssen7
                  Badcaps Veteran
                  • Nov 2012
                  • 252
                  • Canada
                  #5
                  Re: 40E200U1 - Anyone need these boards?

                  +1 on the EBAY comment. Makes me wonder though, how many piles of boards are sitting in boxes with no "easy" peer to peer sales solution.

                    Comment

                    • tvtimmy
                      Badcaps Legend
                      • Mar 2015
                      • 1160
                      • usa
                      #6
                      Re: 40E200U1 - Anyone need these boards?

                      Post them on Craigslist. I go to a site named "all of Craigslist " and I can see what's for sale all over the world.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • ugamazing
                          Three 820-01700 32GB Logic Boards Same Issue: Won't Wake From Hibernate
                          by ugamazing
                          I have three identical-spec 820-01700 boards (2.6/32/512), and ALL THREE boards came to us with the same fault, from different sources: The boards don't wake from hibernation with the keyboard or lid, they ONLY wake when you press the power button. I understand this is a very minor issue, but the boards must be fixed!

                          We will of course begin with the obvious (checking lid signals), but I couldn't help but notice these three boards were all 32GB variants. Has anyone noticed an issue relating to these 32GB boards in particular? I of course don't think it's a RAM issue, but it's bizarre...
                          12-17-2024, 07:05 PM
                        • ugamazing
                          Apple M1 Boards & Exclamatory Error?
                          by ugamazing
                          We've now created a stack of 10 boards that have the same issue, which we suspect to be CPU-related. The issue is very simple--the board will not boot to anything, only showing the exclamatory sign inside a circle. No amount of DFU/restore, wipe/erase, etc, will resolve the issue. No boards have physical damage. We went ahead and replaced the SSD nands on two boards (one 02020, one 02016) and the issue remained exactly the same. We are considering replacing the CPU on one of the boards using a locked CPU, just so we can see if it resolves the issue.

                          Has anyone else run into this...
                          02-20-2025, 09:24 AM
                        • ugamazing
                          Best place to source RAM chips? 8GB 820-00850 boards to 16GB or 32GB
                          by ugamazing
                          I'm looking to upgrade several 8GB 820-00850 boards to 16GB or 32GB for personal use. I am curious what the best practice and process is for sourcing new replacement chips, and what vendor(s) you guys prefer? Another question is, how do I find compatible chips and their corresponding part/model numbers? For example, in the 820-00850 schematic, the DDR chip U2600 model listed (EDFB232A1MA) corresponds to 1x32GB chip. Of course, I would need 4x8GB chips to replace the 4x2GB chips currently on the board. How do I find compatible 8GB chips? Is it as simple as searching "BGA178 8GB 2133"...
                          08-31-2022, 07:34 AM
                        • DXseekerMO
                          Backlight strip quality, Amazon vs Ebay vs ShopJimmy. Is there really a difference?
                          by DXseekerMO
                          Hello everyone!

                          Recently I've noticed that some ShopJimmy backlight strips don't have double-sided tape installed upon them when an application calls for it, and I must purchase the tape separately. In a recent chat conversation with a customer service agent I told them if this tape wasn't applied when it was called for I would begin to consider ordering my backlight strips elsewhere. It looks like this time may have come.

                          I recently got a TCL 65S4 with bad backlights. After looking at the SJ listing here: https://www.shopjimmy.com/tcl-jl-d65...365as-m-led-ba...
                          Yes
                          0%
                          1
                          All backlight strips are the same quality
                          0%
                          1
                          No
                          0%
                          0
                          12-16-2021, 03:58 PM
                        • hopkok
                          Legion 5 PRO, 3 boards, same problem, NM-D562 Rev. 3.0 motherboard
                          by hopkok
                          Hi friends, last week I got 3 same boards for repair (NM-D562 Rev. 3.0), same problem, power button light up, but motherboard wont start.

                          3,3V_alw and 5V_alw, 1,8V_alw and 0,75V_alw presented on all 3 boards, no other voltages. 1,2V missing and if I checked schematic right, I need 1,2V and than can be +3VS and +5VS generated after getting SUSP_N signal from KBC? or vise versa?

                          I checked for low resistance on coils, no low resistance.

                          Anyone with same issue like me?

                          Thanks for any help.
                          05-24-2025, 04:21 AM
                        • Loading...
                        • No more items.
                        Working...