Bush LCD40/68F EPROM dump please

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • D1964
    New Member
    • Apr 2015
    • 5
    • United Kingdom

    #1

    Bush LCD40/68F EPROM dump please

    Hi,
    Have the above set with t.msd306.68a 12023 screen lta400hm07 chip u10
    If any one has the dump for this I would appreciate it.
    Thanks David

Related Topics

Collapse

  • Habble7
    I need a BIOS dump for the Samsung S49CG934SU monitor
    by Habble7
    The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.

    Suspected Cause:
    I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.

    Troubleshooting Attempts:
    ...
    05-22-2025, 07:28 AM
  • Mephysis
    DUMP DVR HIKVISION DS-7208HGHI-K1 (80389 Rev 1.3 Firmware)
    by Mephysis
    Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.

    I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"?
    03-27-2025, 02:34 AM
  • Davi.p
    UE32T5370 need eprom dump
    by Davi.p
    Hi, merry Christmas..
    i need good dump for the model in topic, brand Samsung, the chip is the EN25Q40B, near the eth socket, main board is bn91-21809k and is built in also UE32T5372 etc..
    Bye bye..
    12-24-2022, 02:03 PM
  • Andreas_de
    Power supply Manson NTP-5561 (5661) LCD controller dead - PIC18F87K90 HEX dump required
    by Andreas_de
    Hello!

    i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
    Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.

    Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
    ...
    04-12-2025, 10:38 AM
  • Buzzfuzz2k
    Bios password removal on a Unowhy dump
    by Buzzfuzz2k
    Hi Everyone,

    I'm facing a problem with a locked bios with a password and i can't find how to remove it...

    The small computer is only booting on a M2 ssd Windows partition and i get a "signed partition error" if i try to boot on the same SSD with another Os (linux for example).

    the Computer is a Unowhy small pc
    N° UYM6524702229


    After failling trying to boot on other "none Windows" partition, i wanted to try to remove the bios password.

    My first attempt was to get the bios dump from windows...
    11-13-2023, 07:37 AM
  • Loading...
  • No more items.
Working...