Sharp Aquos TV LC-60LE644U

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Mariomatty
    New Member
    • May 2018
    • 8
    • USA
    #1

    Sharp Aquos TV LC-60LE644U

    I have a Sharp Aquos TV LC-60LE644U for the past 6 months I have noticed that almost every few nights after the TV has been on for a little the screen would turn green/multicolor or just freezes and have a high pitched screeching sound before it turns off. Some times it turns right back on, other times it needs to sit for 5-10 min before it will restart. The last time it happened it wouldn't turn on for a few days. I get a red standby light on the front of the TV. I checked the outlet and power supply, I have standby voltage on the power supply (5V) both 12v wires give 12v. How can I tell if its the main board (NQP890M0005N00) or the Power Supply? I found the service manual and I was not sure what to test first. I attached a few photos of the boards.

    https://issuu.com/portal-da-eletroni...arp_lc-60le644

    Any advice is appreciated thanks!
    Attached Files
    Tags: None
    • freakaftr8
      Badcaps Legend
      • Oct 2012
      • 3743
      • USA
      #2
      Re: Sharp Aquos TV LC-60LE644U

      Sounds like mainboard failure. Ot locks up due to bad connections under the main processor or may be RAM related. Either way, replace the mainboard and you'll be back in business.
      Did I leave the soldering iron on?

        Comment

        • CapLeaker
          Leaking Member
          • Dec 2014
          • 8146
          • Canada
          #3
          Re: Sharp Aquos TV LC-60LE644U

          my bet is a bad main board. I also suspect bad solders under the main IC.

            Comment

            • DXseekerMO
              Badcaps Legend
              • Feb 2018
              • 1119
              • US
              #4
              Re: Sharp Aquos TV LC-60LE644U

              Nice to see people fixing these Aquos TV's...they sure have a nice picture and a real hot OTA tuner.
              They call me......."threadkiller"

                Comment

                • Mariomatty
                  New Member
                  • May 2018
                  • 8
                  • USA
                  #5
                  Re: Sharp Aquos TV LC-60LE644U

                  Update. TV started working randomly for a year then just stopped again. This time no picture but sound works fine. Have a blue glow to the tv so I assume that’s the back light. Sometimes it will turn on but have a constant humming buzzing sound. Will stay on till we turn it off then won’t get a picture again for a few days. I couldn’t find a main board to purchase. Anyone know where I can buy one if you think that’s still the issue?

                    Comment

                    • nomoresonys
                      Badcaps Legend
                      • Jan 2013
                      • 12145
                      • U.S.
                      #6
                      Re: Sharp Aquos TV LC-60LE644U

                      Take the mainboard out and check for cold/bad/cracked solder joints on the bottom side, look closely, sometimes they look good but can still be bad or loose.

                        Comment

                        • nomoresonys
                          Badcaps Legend
                          • Jan 2013
                          • 12145
                          • U.S.
                          #7
                          Re: Sharp Aquos TV LC-60LE644U

                          Maybe check tcon fuse F101, see if you have about 12 volts on each side of fuse, neg. - probe on chassis ground, pos. + probe on each side of fuse.
                          Last edited by nomoresonys; 01-31-2020, 06:33 AM.

                            Comment

                            • nomoresonys
                              Badcaps Legend
                              • Jan 2013
                              • 12145
                              • U.S.
                              #8
                              Re: Sharp Aquos TV LC-60LE644U

                              Could try heating with a hairdryer or cooling with freezespray/inverted can of duster, U3 on FRC board, smaller board next to mainboard, wait about 15 seconds, plug tv in and see if it works even for a bit.

                                Comment

                                • nomoresonys
                                  Badcaps Legend
                                  • Jan 2013
                                  • 12145
                                  • U.S.
                                  #9
                                  Re: Sharp Aquos TV LC-60LE644U

                                  When tv was working was there any horizontal lines __ __ on the display? Did you try having one ribbon cable at a time disconnected from tcon to panel, then power up and see what you get on display, ALWAYS unplug tv power before disconnect any cables then plug power in after unplug connector. Meaning don't unplug any connectors while power cord is plugged in because the standby is always working and you don't want to accidentally mess anything up with a power surge or any other electrical gremlin type thing.
                                  Last edited by nomoresonys; 01-31-2020, 07:18 AM.

                                    Comment

                                    • nomoresonys
                                      Badcaps Legend
                                      • Jan 2013
                                      • 12145
                                      • U.S.
                                      #10
                                      Re: Sharp Aquos TV LC-60LE644U

                                      Don't know if it will do the trick but there's a tcon, sometimes sound and no video is a tcon issue, as always make sure it's a match if you buy it: https://www.ebay.com/itm/Element-RUN...0AAOSw~NBdQ0LK

                                        Comment

                                        Previous template Next

                                        Related Topics

                                        Collapse
                                        • Tynan Dill
                                          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                                          by Tynan Dill
                                          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                                          Upon bringing it home and plugging it up, it showed a standby light.

                                          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                                          The screen seems to blackout and stay black, but with a flashlight I can see the display.

                                          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                                          Assuming...
                                          ORIGINAL POWER SUPPLY BOARD
                                          7 Photos
                                          11-22-2024, 01:46 PM
                                        • sam_sam_sam
                                          Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                                          by sam_sam_sam
                                          I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                                          One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                                          03-31-2024, 02:12 PM
                                        • scubacamper
                                          Sharp Aquos LC-70C6400U Half Screen Dark
                                          by scubacamper
                                          I found another post on this site the other day which has been very helpful in troubleshooting this issue I am having with my tv. The left half of the screen is dark, and the other half is VERY slow to generate it's image - and it only generates part of its image at that.
                                          Based on this yt video, I have narrowed it down to an issue (short?) on the left side of the display, somewhere in the system of ribbon cables.
                                          when I remove the bezel and the rear cover, I can get the image to display correctly by manipulating the ribbon cables on the left side which connects the left lower display...
                                          https://youtu.be
                                          05-03-2025, 12:19 PM
                                        • sam_sam_sam
                                          Modification to a ZD-987 desoldering/soldering station using a external switching power supply
                                          by sam_sam_sam
                                          I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

                                          I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
                                          07-01-2024, 06:34 AM
                                        • timtrace
                                          Won't stay powered on - Sharp LC52LE700UN with RDENCA336WJQZ DPS-286AP power supply
                                          by timtrace
                                          Greetings - first post. I'm awed that a forum like this exists. It's a dream come true. I'm not even kidding.

                                          I've got a 13 year-old Sharp LC52LE700UN television that's developed a problem of powering itself off after 30-45 seconds. If I pull the mains cord and reconnect, it will come back on right away without so much as a button push...then turn off after 30-45 seconds.

                                          Service manual S37X3LC46E77U is attached to this post, as well as a front and a back picture of the RDENCA336WJQZ DPS-286AP power supply taken after completing my work.

                                          Each time that the...
                                          05-14-2020, 09:24 PM
                                        • Loading...
                                        • No more items.
                                        Working...