Liability Insurance for TV Repair Techs | Recommendations | Comments

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Louis82
    Badcaps Veteran
    • Feb 2012
    • 240
    • USA
    #1

    Liability Insurance for TV Repair Techs | Recommendations | Comments

    Hello,

    I'm currently at the situation where I would like to purchase a General Liability Insurance that covers my In-Home Tv Repair Services ( I travel to customer house)
    Do you all know about any reliable Insurance Company that could cover me from damaging a 70" screen to breaking a expensive decoration in customer living room or scratching walls, etc.

    I have avoided the insurance protection for years but now I have decided to purchase it and don't know where to go or what is a good or a reasonable price to pay.

    I contacted 5 months ago a local independent insurance company and they provided me a quote from USLI for $514 annual payment. I didn't purchase it at that time because holidays were coming so I waited. Today I contacted USLI directly cause my local insurer seems to be busy that is not answering the phone, and the USLI agent told me they don't insure Tv Repair Techs.

    I also have read online about Insureon but there are so many good and bad reviews that I don't know what to think.

    Any thoughts or recommendations will be appreciated.
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Liability Insurance for TV Repair Techs | Recommendations | Comments

      I would have thought general professional indemnity insurance would cover you. Check the restrictions on the policy.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • evilkitty
          Tools and supply reconndations
          by evilkitty
          Is this still a/the recommend iron?
          https://www.amazon.com/KSGER-Tempera.../dp/B07PYFSCJ9

          *For use at a desk w/ cheap replacement tips available (if i need to get brand names ones for a specific use that is fine)
          i would like something good for SMD parts on boards (not messing with BGA comments)
          a tip recommendations would be nice

          where should i get some flux and low melt solder from?

          other tool recommendations?

          Other tools i have or ordered:
          ZD-915 de-soldering gun
          Atten ST-862D...
          11-21-2024, 02:59 PM
        • caprider
          Recommendations of quality soldering station and (separate) hot air station
          by caprider
          Hey,

          I'm looking for some recommendations of a decent quality soldering station and a separate hot air station. I'm just a hobbyist, so even if (ultra)premium tools are not required, I still want some good tools. They should be available in Europe.

          I now have a TS100 and some soldering irons and looking for some better tools.

          1. Soldering station, budget around 200-240€
          JBC BT-2BWA seems to be a good product in the budget.

          2. Hot air station, budget around 200€
          Up to now I've found ATTEN ST-862D to be a good option....
          01-15-2022, 02:05 AM
        • EasyGoing1
          PWM LED Driver DIY - looking for comments and criticism
          by EasyGoing1
          So some of you might remember when I did this project



          Which I then ended up using this dimming circuit to drive the panel.

          The problem with that circuit is that after it switches on, it starts out at a fairly high voltage and then there really isn't any "sweep" of value range before it just jumps to the highest value making the circuit pretty much useless and it's only gotten worse in that behavior over time.

          So since I have a grip of 555 timers, I decided to see what I could find on the web for any decent PWM schematics that...
          07-16-2022, 04:20 AM
        • slybunda
          ESR / LCR meter recommendations?
          by slybunda
          hi all, looking to expand my toolset, i have a multimeter that can check capacitance of capacitors but doesnt check esr. so im after a cheapo meter that can do the job without costing an arm and a leg for someone who only dabbles with electronics now and then. whats good option to go for thats..... cheap??
          01-02-2024, 05:16 PM
        • AJ847.63e
          Need some recommendations for windows cloning.
          by AJ847.63e
          Hi All,

          Just wanted to get some advice on what people are using for backing up/ cloning their windows installs and programs?

          Two issues I'm looking to solve:

          1: I'm looking at setting up a NAS for us in the office so I can clone and backup the two systems we have here. It would be nice if I could setup automatic backups that run weekly say Friday after 5pm so if windows decides to be windows and kill itself, we've got something to fall back on.

          2: Cloning customer machines where needed. We're currently using AOMEI backuper but it is...
          10-31-2023, 06:00 PM
        • Loading...
        • No more items.
        Working...