So my buddy got a new TV when his old one broke and gave me the broken one as I've fixed a computer monitor before. It's a LG PC3D-UD. Opened up the back and took a look around. There's a bunch of caps on the power supply that look blown. When I fixed the computer monitor all I did was replace a few blown caps and everything worked again. Given the sheer number of caps that look blown on here I'm wondering if they just kinda all went bad in parallel or if this a bigger problem I'm not seeing.
Also, I was able to find the service manual for the TV but it seems to exclude any information on the power supply at all (other than the partnumber for the whole PSU board). Anybody know if there's a schematic for the LG 6709900020A Power board? I'd like to be 100% sure before I order new caps.
Finally, I'm pretty new to all this so any advice would be helpful!
:edit: I'm also pretty sure the solder I have is terrible for working with PCBs would love a recommendation on what type of solder I should be using.
Also, I was able to find the service manual for the TV but it seems to exclude any information on the power supply at all (other than the partnumber for the whole PSU board). Anybody know if there's a schematic for the LG 6709900020A Power board? I'd like to be 100% sure before I order new caps.
Finally, I'm pretty new to all this so any advice would be helpful!
:edit: I'm also pretty sure the solder I have is terrible for working with PCBs would love a recommendation on what type of solder I should be using.
Attached Files
Comment