Panasonic 55as802 Stuck on panasonic logo

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zomi
    Badcaps Veteran
    • Nov 2011
    • 509
    #1

    Panasonic 55as802 Stuck on panasonic logo

    Panasonic 55as802 Stuck on panasonic logo

    I have one of these stuck on the logo
    the mainboard nand is gone from the looks of it.
    Not too easy to find a replacement board at the moment
    short of waiting for one to turn up is there anything else to be done.

    i have downloaded the bin file from panasonic and put on the usb but nothing happens
    is there anything else a key combo to force it to update or anything like that
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • tranquility
      Onkyo TX-NR809 – no hdmi, DTS or NAND chip ? stuck at starting kernel
      by tranquility
      Hello,
      i want to repair an Onkyo TX-NR809 receiver.

      symptoms:
      on power on, display appears and i hear one click. enue functions is given.
      - no hdmi output
      - audio output not tested, but i think it is not there
      - usb sticks are not recognized

      if i read out the chips with display+standby button + tone+
      both dts show only ????

      chip is D830K013BZKB4

      things i have done:
      - reflow of the dts chip without taking off and reballing
      - changed the aluminium caps without the big one with 25v because i dont...
      08-25-2025, 01:04 AM
    • x_orange90_x
      Vizio V555-G1 stuck on wallpaper; now stuck on V logo
      by x_orange90_x
      I just got this tv today and it's getting stuck on the wallpaper. When I first power it on it goes to the V logo, then a black screen for about 15 seconds, then a Chromecast error for just a few seconds, and then finally to a wallpaper. It stays frozen on this wallpaper and does not respond to anything on the remote besides power on/off. Likewise the buttons on the tv do nothing either (besides power). I did the "reset" by holding the volume down and input buttons together for 10 seconds. It showed a message at the top of the screen saying it was Wiping Data and would restart soon. After...
      12-28-2023, 06:26 AM
    • G33RT
      Philips 8200 series 65PUS8204/12 stuck at Philips Logo
      by G33RT
      Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

      It does power up when pressing the power button.

      I already try the power button while plugin the plug with no result.
      Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

      Could this be an PSU or eMMC issue ?
      07-19-2025, 03:43 AM
    • justice171
      JVC LT-50N795 Stuck on Wisdom Share Logo
      by justice171
      Hi everyone,

      I'm working on a JVC TV for a client that's stuck on the "Wisdom Share" logo screen.

      It's a model LT-50N795 with a board number TP.HV510.PC822. I attempted a firmware update via USB, and while the upgrade was completed successfully, the TV is still stuck on the Wisdom Share screen on reboot.

      Has anyone encountered this issue before, or does anyone have any suggestions on possible solutions?

      Thanks in advance!
      ​...
      11-04-2024, 02:55 AM
    • mr.Data
      Macbook A1990 stuck on logo
      by mr.Data
      Hello,

      This Macbook Pro 2018 boots up and then gets stuck on the logo.
      All the normal methods of resetting this Macbook have been tried but do not work.
      I cannot get into recovery mode and there is no bar displaying, it's just the white logo on a black background.

      Any help would be greatly appriciated....
      04-18-2024, 11:51 PM
    • Loading...
    • No more items.
    Working...