Sharp TV Bad tab drivers?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jjanssen7
    Badcaps Veteran
    • Nov 2012
    • 252
    • Canada

    #21
    Re: Sharp TV Bad tab drivers?

    I have done 40-50 of each (cut off tape & tab removal) and in my experience it's an either-or situation. Remove tabs or if there are none, do the tape trick.

    Comment

    • budwich
      Badcaps Legend
      • Jul 2015
      • 3097
      • Canada

      #22
      Re: Sharp TV Bad tab drivers?

      sheesh!! I wonder if there are any of these sets with good innards... :-) I think the question still is, if one has side tabs, will the "cutoff tape" method work?

      Comment

      • eaglei22
        Member
        • Jan 2018
        • 12
        • US

        #23
        Re: Sharp TV Bad tab drivers?

        Hey guys, thanks for the replies. I had gotten a warranty replacement on the tv so i just put this one in the basement once I got the knew one. Because there is a small risk to cutting the tabs and the lines were very skinny (at the time) I just left it.

        I was going to start using it in the basement while exercising.. then I got rhabdo, spent time in the hospital and stopped exercising for a long while as mentioned.

        Anyway.. so you're thinking the driver tab exacerbated the power flux and possibly shorted out the power board?
        Last edited by eaglei22; 02-16-2019, 11:43 PM.

        Comment

        • jjanssen7
          Badcaps Veteran
          • Nov 2012
          • 252
          • Canada

          #24
          Re: Sharp TV Bad tab drivers?

          In my experience, it the tv came with tabs then the only fix is to remove them. If it is the type that does not have tabs then the tape cut off method is the only choice. Ive never been able to get the tape methid to work on a tv with tabs.

          Comment

          • nomoresonys
            Badcaps Legend
            • Jan 2013
            • 12268
            • U.S.

            #25
            Re: Sharp TV Bad tab drivers?

            Ok, thanks Jjanssen7. If I had the space I would get some to operate on to save from landfill and give to poor friends and deserving relatives.
            Last edited by nomoresonys; 02-17-2019, 09:26 AM.

            Comment

            • budwich
              Badcaps Legend
              • Jul 2015
              • 3097
              • Canada

              #26
              Re: Sharp TV Bad tab drivers?

              Originally posted by eaglei22
              Hey guys, thanks for the replies. I had gotten a warranty replacement on the tv so i just put this one in the basement once I got the knew one. Because there is a small risk to cutting the tabs and the lines were very skinny (at the time) I just left it.

              I was going to start using it in the basement while exercising.. then I got rhabdo, spent time in the hospital and stopped exercising for a long while as mentioned.

              Anyway.. so you're thinking the driver tab exacerbated the power flux and possibly shorted out the power board?
              noooo. it is unlikely that there is anything wrong with the power board... the error code is an indication that the system doesn't like some "level" associated with powering but doesn't actually mean that the power board is broken. This can only be confirm by checking the voltages though.

              Comment

              • nomoresonys
                Badcaps Legend
                • Jan 2013
                • 12268
                • U.S.

                #27
                Re: Sharp TV Bad tab drivers?

                Yep, the side with the line is the side the tabs need removed from, many detailed threads on here for determining which side and tab removal procedure, remember just remove side tabs and only ONE side, the bad side.

                Comment

                Related Topics

                Collapse

                • Tynan Dill
                  Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                  by Tynan Dill
                  I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                  Upon bringing it home and plugging it up, it showed a standby light.

                  I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                  The screen seems to blackout and stay black, but with a flashlight I can see the display.

                  With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                  Assuming...
                  11-22-2024, 01:46 PM
                • PantherDave
                  Microsoft Surface Pro (5th gen) model 1796 - no power
                  by PantherDave
                  Hi all!

                  I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

                  I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
                  https://www.badcaps.net/forum/troubl...-hardware-devi...
                  05-29-2024, 02:01 PM
                • GLISIT
                  Asus Probook P5440UF-XB74 power issue
                  by GLISIT
                  Hi all,

                  TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


                  I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

                  A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
                  01-16-2025, 02:29 PM
                • sam_sam_sam
                  Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                  by sam_sam_sam
                  I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                  One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                  03-31-2024, 02:12 PM
                • Document Archive
                  HP Pavilion Power Pavilion Power 15-cb009nl Notebook 15 Specification for Upgrade or Repair
                  by Document Archive
                  This specification for the HP Pavilion Power Pavilion Power 15-cb009nl Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Pavilion Power 15-cb009nl boardview and Pavilion Power 15-cb009nl schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...
                  09-06-2024, 05:59 AM
                • Loading...
                • No more items.
                Working...