Announcement

Collapse
No announcement yet.

samsung le40c630k1wxxn doesn t start...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    samsung le40c630k1wxxn doesn t start...

    hi guys i receive a samsung tv model code le40c630k1wxxn who doesn t start and the red light flashing near the button on/off someone has some experience about it

    i didnt open the cover back yet i will do it

    if someone has some information

    thanx a lot

    #2
    Re: samsung le40c630k1wxxn doesn t start...

    Anyone with some issue ? Thanx

    Comment


      #3
      Re: samsung le40c630k1wxxn doesn t start...

      Flashing LED at bottom is normal power up cycle for Samsung. You'll need to get it opened up for some voltagce checks.
      Did I leave the soldering iron on?

      Comment


        #4
        Re: samsung le40c630k1wxxn doesn t start...

        Thanx friend someone has some schematics ?

        Thanx

        Comment


          #5
          Re: samsung le40c630k1wxxn doesn t start...

          Do you have sound? If you shine a light at the screen, can you see a picture, or the menu (if you push the menu button) Un plug tv, the disconnect the cable between the main board and power supply, plug in tv to see if the backlights come on

          Comment


            #6
            Re: samsung le40c630k1wxxn doesn t start...

            hi guys for late response i didnt test anything for the moment so only symptom can i say it s when i plug the cable into tv i have a red light blinking near button on/off no image and no sound

            someone have some schematics for this model ? thanx for help

            Comment


              #7
              Re: samsung le40c630k1wxxn doesn t start...

              Open it up and unplug the wires from the power supply to the mainboard. Plug tv back in and if backlights come on, the mainboard is bad. I have a feeling it is because I have seen this many times on c600 series.

              Comment


                #8
                Re: samsung le40c630k1wxxn doesn t start...

                the red light near button on/off bliking 2 times and then a small sound appear "like sound error" and stop blinking again 2 times = small sound error and stop blinking .

                i make a second test i disconnect the cable going to the mainboard and i turn on the tv and now the tv back light turn on i suppose the problem is in the mainboard ? but not sur ...

                i would make some test measurement but i m not sur about my test ... how to proceed i post to you some picure to help if possible

                thanx a lot
                Attached Files

                Comment


                  #9
                  Re: samsung le40c630k1wxxn doesn t start...

                  Mainboard is the problem.

                  Comment


                    #10
                    Re: samsung le40c630k1wxxn doesn t start...

                    thanx a lot for your fast response and help

                    Comment


                      #11
                      Re: samsung le40c630k1wxxn doesn t start...

                      Hi guys i come back with news so i disconnect the cable from psu and connect back the cable from mainboard i have too back light come on too the question is it possible that the problem is the mainboard? Second step i begin some measurement on the cn802 connector on psu (1 to 17) and i saw when the red light blicking the voltage is stable but after 2 blinking light a small sound error appear and the voltage drop i will check the pin 2 to 18 if it s same symptom

                      Any suggestion are welkom

                      Thanx for help

                      Comment


                        #12
                        Re: samsung le40c630k1wxxn doesn t start...

                        Sounds like main board
                        Did I leave the soldering iron on?

                        Comment


                          #13
                          Re: samsung le40c630k1wxxn doesn t start...

                          hi guys today i make some test i disconnect the cable from t con board and i let the cable between main board and psu board and now i have bl on + now start sound without image ( normal t con disconnect ) someone has some measurement test for the t con AUO T315HW04 V3

                          thanx a lot
                          Attached Files

                          Comment

                          Working...
                          X