power board faulty BN44-00197A

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ebenedekfi
    New Member
    • Aug 2016
    • 6
    • Románia

    #1

    power board faulty BN44-00197A

    Working on a Samsung LE40A430T1,with a power board faulty BN44-00197A.
    In first stage I changed following caps: CM804, CM806, CM809, CM812, CM810, CM808
    Resistor RM851, RM852, RM853 are burnt, i changed it, and I changed the IC ICM802 too.

    Now my problem:

    Standby voltage 5.3V is OK, if the mainbord is not plugged in, but if plugged in MB the standby voltage become 2.1V-2.3V instable. without MB ribbon plugged in, the power supply starting ok, 13V ok, 12V on inverter ok.
    Please help.

    Endre
  • Andrew F. Ali
    Badcaps Legend
    • Jan 2014
    • 2450
    • Trinidad & Tobago

    #2
    Re: power board faulty BN44-00197A

    OK. So you determined the PSU is working now. but did you see the backlights come on?....However, you do have a Main Bd. problem.

    Comment

    • ebenedekfi
      New Member
      • Aug 2016
      • 6
      • Románia

      #3
      Originally posted by Andrew F. Ali
      OK. So you determined the PSU is working now. but did you see the backlights come on?....However, you do have a Main Bd. problem.
      Thank for your reply.
      No backlight, nothing. Before I replaced the caps, red standby light blinked. Now nothing.

      Comment

      • Andrew F. Ali
        Badcaps Legend
        • Jan 2014
        • 2450
        • Trinidad & Tobago

        #4
        Re: power board faulty BN44-00197A

        You said you have 12V to the Inverter. Were the backlights plugged in? If yes, then you may have an inverter issue or backlight issue as well. BTW how did you get the PSU to come on without the Main Bd. connected?

        Comment

        • ebenedekfi
          New Member
          • Aug 2016
          • 6
          • Románia

          #5
          Re: power board faulty BN44-00197A

          I put a jumper pin1-pin3 on connector CN801.
          Pin1- power on-off
          Pin3- stb 5.3V

          Pin1 at conn. CNI803 (inverter on/off) I measured 0V.

          Comment

          • ebenedekfi
            New Member
            • Aug 2016
            • 6
            • Románia

            #6
            Re: power board faulty BN44-00197A

            I measured 12V on pin1 conn CNI806

            Comment

            • ebenedekfi
              New Member
              • Aug 2016
              • 6
              • Románia

              #7
              Re: power board faulty BN44-00197A

              If I shorting inverter on/off and stb 5.3V , the backlight come on.

              Comment

              • Andrew F. Ali
                Badcaps Legend
                • Jan 2014
                • 2450
                • Trinidad & Tobago

                #8
                Re: power board faulty BN44-00197A

                That means you PSU is good and your Backlight drivers are OK, too. You have a Main Bd. problem, as I stated in Post# 2.

                Comment

                Related Topics

                Collapse

                • Tynan Dill
                  Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                  by Tynan Dill
                  I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                  Upon bringing it home and plugging it up, it showed a standby light.

                  I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                  The screen seems to blackout and stay black, but with a flashlight I can see the display.

                  With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                  Assuming...
                  11-22-2024, 01:46 PM
                • m1ch43lzm
                  HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                  by m1ch43lzm
                  Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                  Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                  05-12-2025, 08:37 PM
                • eastcoastcomputing
                  XPS 15-9530 faulty board LA-L663P
                  by eastcoastcomputing
                  Hi there,

                  Sorry for the double post: I also posted in the Schematics only but couldn't find how to delete the post and I'm apparently not allowed to edit it... My apologies

                  I'm trying to get the schematics and BV for a Dell XPS 15 9530 (motherboard: LA-L663P)... Can anyone help?

                  The board powers up for a couple of seconds (the on/off light on the side of the board comes on, no display, no fans rev, no Dell LED code) then shuts down (the on/off light on the side of the board goes off), no liquid damage, no obvious damage to individual components...
                  ...
                  04-29-2025, 05:58 AM
                • howardc64
                  A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                  by howardc64
                  Problem

                  This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                  08-04-2024, 10:36 PM
                • Hakuu
                  LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
                  by Hakuu
                  Hi There,

                  This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

                  After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

                  More Details

                  TV Model - LG OLED77G1PUA

                  Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
                  07-12-2023, 02:37 PM
                • Loading...
                • No more items.
                Working...