Sharp Aquos no picture

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • welwisher101
    New Member
    • Oct 2017
    • 5
    • United States

    #1

    Sharp Aquos no picture

    I am really confused about the behavior of my TV. Not sure what is causing it. Could you please shade some idea about what could be going on?

    Metadata:
    TV model: Sharp 60" 60C6600U
    Purchased a little less than 2 years ago

    Symptoms:
    No picture (Sound is there so main board must be ok). When I press the power button on remote (or when I plug the TV in for first time) the display flashes for a split second and then goes off. See this video
    https://youtu.be/I-z2YCoF0mo

    If I remove one of the two connectors on the t-con board and then try to turn TV on, it turns on. Obviously only half the screen has picture other half is just white. Does not matter which side of the connector I remove. As long as one connector is not connected the picture comes on. See attached pictures.

    Things I have done so far:
    1. Replaced the t-con board with no improvements exact same symptoms (I bought a used t-con board from ebay. Maybe this one is bad as well?)
    2. If I remove the power supply to tcon board (12V 4 pin connector coming from power board) and plug it in. The display flashes for split second just like when I power it on for first time.

    I am clueless as to why its doing this. Any help would be greatly appreciated.
    Attached Files
    Last edited by welwisher101; 10-02-2017, 05:13 PM.
  • dskall
    Badcaps Legend
    • Oct 2016
    • 2905
    • usa

    #2
    Re: Sharp Aquos no picture

    Might try monitoring your 12v to t-con. Maybe your 12v supply cannot supply enough current due to bad cap etc.
    I assume no responsibility for any stupid suggestions I might post.

    Comment

    • welwisher101
      New Member
      • Oct 2017
      • 5
      • United States

      #3
      Re: Sharp Aquos no picture

      Originally posted by dskall
      Might try monitoring your 12v to t-con. Maybe your 12v supply cannot supply enough current due to bad cap etc.
      Looked at the 12V supply while turning TV on and it does not fluctuate at all. I only have a multimeter so its not very highspeed. I do not have an oscilloscope to monitor at high speed. But on the multimeter the voltage does not drop at all.

      Comment

      • dick_barton
        Badcaps Legend
        • Aug 2015
        • 6642
        • Wales

        #4
        Re: Sharp Aquos no picture

        What are the voltages on the Tcon small white connector when only one ribbon is connected and then when both are connected.
        Willing to help but I'm no expert.

        Comment

        Related Topics

        Collapse

        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          11-22-2024, 01:46 PM
        • m1ch43lzm
          HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
          by m1ch43lzm
          Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
          Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
          05-12-2025, 08:37 PM
        • advant
          Driving a Sharp TCON/panel with a universal main board
          by advant
          This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

          I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
          02-03-2020, 12:25 AM
        • thesharpfella
          Is this white-washed screen caused by a faulty T-Con board or panel? Sharp Aquos c70le735x
          by thesharpfella
          Hello esteemed gentlemen. I have owned this LCD TV since 2012. The only repair was the replacement of the PSU a few years ago. Apart from that, no issues. Recently, all was working fine until I switched on to see it appear as so. The day before it was working fine. There is sound. Could this be a T-Con board issue? If not, what could it be? Thank you.

          ...
          07-23-2024, 10:37 AM
        • maxim2511
          LG 55EC930V OLED - swich on swich of no screen
          by maxim2511
          My Oled Tv is 55inch tv, 3 days ago I notice that middle of the screen is getting warmer and on picture I have ghosting, missing red color. Color red was still displaying, but it was not so strong as corners of the screen and watching some movies makes me angry.
          Then I get an idea to take it apart and clean boards from dust.
          In side of Tv was not so bad, I take compressed air in can, and gently blow up.

          Also I was thinking to styrofoam sponge to isolate power board from screen that the middle of the screen will not worm so much. Because Led on screen when gets higher...
          05-14-2021, 02:21 AM
        • Loading...
        • No more items.
        Working...