LG RHT397H DVD/HDD Recorder

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jackplug 123
    Retired tech
    • May 2016
    • 65
    • United Kingdom
    #1

    LG RHT397H DVD/HDD Recorder

    Hi,
    does anyone have a list of the default Op Codes for an LG RHT397H UK Version PAL DVD/HDD Recorder please?
    They can be accessed by pressing CLEAR on the remote and the DVD Drawer OPEN button on the main unit simultaneously for 6 seconds.

    Cheers
    Steve
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • sam_sam_sam
      DVR recorder Switching power supply Failure
      by sam_sam_sam
      When I originally started with my DVR recorder it had 4 individual switching switching power supply’s that were sh*t so I bought a 7 amp 12 volt switching power supply and modified the output plug and put a four output power supply cable to match the input power supply cable inputs

      Which worked for over 14 years until a few days ago when the cameras went dark no picture anymore well it turns out now the switching power supply has stopped working altogether now so I have to troubleshoot what has happened to this power supply more later on today what I found

      This...
      05-27-2023, 03:03 AM
    • Ady2017
      Panasonic DMR-EZ48V DVD/VHS combo - DVD recorder part not working
      by Ady2017
      I have recently inherited a Panasonic DMR-EZ48V DVD/VHS combo after my dad died. I tried to record a DVD with it and it worked for about 5 mins before it suddenly stopped. Since then it just keeps making a noise like it is trying to read a disk but then gives a 'no read' error message. I have tried numerous DVD's and it is definitely the recorder that is the problem. I did find a youtube video showing that capacitors on the power board were a common problem on these and so I went ahead and replaced the capacitors but it is still doing the same thing. I now think that it could be the laser that...
      06-06-2025, 08:05 AM
    • sam_sam_sam
      DVR camera recorder switching power supply capacitor failure really
      by sam_sam_sam
      These cheap non brand capacitors at it again

      Last night we had a power outage [ long drawn out trying three to come back up before going out completely ] and when I went to turn the DVR camera recorder back today no go 3 bad capacitors ( one capacitor no ESR reading on DVR board the other 3 capacitor on the power supply board over 40 ohm this is not a misprint ) on the external switching power supply and one capacitor on the DVR camera recorder board where the power supply that goes to the hard drive disk is

      Well at least I have the cameras back on line I to try the...
      01-22-2022, 06:28 PM
    • UNITRAX
      Radio tape recorder Hitachi TRK 8010k - How to install aux in place of am band?
      by UNITRAX
      Hitachi TRK 8010k
      Is it possible to have an aux input in place of the radio on the am band range? When connecting to the tape recorder, I have additional tape noise. There is an integrated circuit HA11251 in the schematic. Which pin is the am radio output on?
      Radio tape recorder diagrams and HA11251 datasheet included...
      02-18-2023, 07:23 AM
    • Oj computer
      HP 840 g1 Turning on DC and read 0.070 then goes off simultaneously.
      by Oj computer
      Pls i also have same issue on HP 840 g1
      Turning on DC and read 0.070 then goes off simultaneously.
      At first MOSFET I have 19v at gate comings from acdrive instead of 25v.
      When checked the the charging
      Acdet is 2.6 cmsrc is 19, but vcc is 0v instead of 19v.
      After that, I jumped 19v to vcc then acdive changed to 25v but still no changes to the pc.
      Am having 2.47 at on/off switch pin
      Kindly help.
      07-12-2022, 11:22 PM
    • Loading...
    • No more items.
    Working...