Hello –
N00b here…
I have a 5 year old LG 55” LED LCD TV (55LM8600) which recently froze up on me while watching TV thru my HD antenna. In any event, the screen froze so I turned the TV off, and when I turned the TV back on, the TV would freeze on the LG start up logo.
First, I unplugged the TV and let it sit. Nothing.
Second, I tried every conceivable method to hard reset the TV. Nothing.
Third, I removed the main board and baked it @ 385-degrees for 10-minutes. Nothing. Still gets stuck on the LG start up screen.
Fourth, I removed the main board and baked it @400-degrees for 15-minutes. – Now there's no LG logo on start up – just a black screen. Fried the board I guess.
Fifth, I ordered a used replacement board from ebay, installed it, and when I turned on the tv, I got the LG logo, then it cycled off to a blank screen. It only did that one time. I re-installed, re-set, un-plugged the TV, now it goes back to the LG logo.
Sixth, I downloaded the firmware update (Dec 2016) to a USB drive, and tried updating per the manufacturers directions. Nothing. Still stuck on the start-up screen.
I'm at a loss. Is there anything else I should check before returning this replacement board??
Thanks!
N00b here…
I have a 5 year old LG 55” LED LCD TV (55LM8600) which recently froze up on me while watching TV thru my HD antenna. In any event, the screen froze so I turned the TV off, and when I turned the TV back on, the TV would freeze on the LG start up logo.
First, I unplugged the TV and let it sit. Nothing.
Second, I tried every conceivable method to hard reset the TV. Nothing.
Third, I removed the main board and baked it @ 385-degrees for 10-minutes. Nothing. Still gets stuck on the LG start up screen.
Fourth, I removed the main board and baked it @400-degrees for 15-minutes. – Now there's no LG logo on start up – just a black screen. Fried the board I guess.
Fifth, I ordered a used replacement board from ebay, installed it, and when I turned on the tv, I got the LG logo, then it cycled off to a blank screen. It only did that one time. I re-installed, re-set, un-plugged the TV, now it goes back to the LG logo.
Sixth, I downloaded the firmware update (Dec 2016) to a USB drive, and tried updating per the manufacturers directions. Nothing. Still stuck on the start-up screen.
I'm at a loss. Is there anything else I should check before returning this replacement board??
Thanks!
Comment