Assistance With Repairing A Sinotec MP-47HU27 LCD TV

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • AudioJunkie
    New Member
    • May 2017
    • 3
    • South Africa
    #1

    Assistance With Repairing A Sinotec MP-47HU27 LCD TV

    Hi

    I need some assistance in regards to my Sinotec MP-47HU27 lcd tv.

    There's a weird line on the top section of the screen and in once place, it runs slightly down the screen that appeared after some bad lightning that
    took out a few items. Once in a while, the picture starts jumping but this is sorted out with switching the tv off and on a few times.

    I would like to work on the tv myself and get this sorted out.

    My questions are can these problems be sorted out or is the tv now done and
    dusted? If it can be fixed, can one of the lcd tv gurus be able to advise me on
    how to sort these problems out?

    Thanks in advance

    Vishen
    Tags: None
    • AudioJunkie
      New Member
      • May 2017
      • 3
      • South Africa
      #2
      Re: Assistance With Repairing A Sinotec MP-47HU27 LCD TV

      Attached is a pic of the tv
      Attached Files

      if you find these attachements useful please consider making a small donation to the site

        Comment

        Previous template Next

        Related Topics

        Collapse
        • jean luc ferre
          laptop hp g72 b52sf screen problems
          by jean luc ferre
          Hello,
          on this laptop hp g72 b52sf i have screen problems as you can see with the photo joined in attachments.
          the used graphic card is "intel hd graphics" and the id of the integrated screen is : "monitor/SEC3354".
          i verified the driver of the péripherals and they are ok. i verified the definition and settings of the graphic card and of the screen : definition 1600x900 and refreshment frequency :60hz. (they are the sames for the graphic card and the screen).
          i don't understand the reasons of the white stripe at the bottom of the screen below the task...
          06-07-2025, 03:27 PM
        • Hondaman
          USB problems?
          by Hondaman
          Recently I discovered my SSD died (OCZ/Toshiba 240 GB). It was in a USB enclosure, attached to the Linksys WRT-AC1200 router. Since then I removed the USB enclosure and attached it to my Win7 PC (AMD 8150 CPU, 970 chipset, 64 GB RAM). I also gathered one or two other USB enclosures to figure out what is going on.

          (I suspect that I lost quite a few MP3 and FLAC files I recently ripped from my audio CDs, I think I lost very little un-replaceable stuff.)

          I think it is IMPOSSIBLE for Win7 to have any problems with a USB enclosure as long as Win7 knows how to speak to the...
          08-12-2024, 03:26 PM
        • clabr
          Lenovo 11e problems (any sata hdds are not recognized, sleep battery drain)
          by clabr
          Need help to solve some problems with this laptop.

          After working in bed with it one night and heating up too much (probably the cause of this problems) the sata HDD OS windows froze
          After restart the original Sata HDD was not recognized anymore (but works fine in other laptops or PCs)

          Tried connecting other good Sata 2.5 HDDs but not one is working in this laptop anymore (not the original nor others)

          Before this had happened I observed some other problems:
          When I tried replacing original mecanical HDD with a SSD HDD could not get them...
          12-02-2021, 08:09 AM
        • ohren
          What problems could this blown cap cause in a Marantz SR5400?
          by ohren
          I'm looking at a vented C513 in a Marantz SR5400 (photo included), in the FR section on page 24 in the service manual (https://audiocircuit.dk/downloads/ma...400-avr-sm.pdf).

          R533 right below it in the photo is charred, but measures the correct value.

          1. I'm not familiar with amplifier circuits (at all — don't know the difference between classes, etc.) so I was wondering what problems would manifest from a supposedly non-operational C513? I didn't hear anything odd when testing the output channel with a speaker. Is there a simple test that can be done...
          c513 r533
          1 Photo
          10-21-2025, 09:02 AM
        • jean luc ferre
          display screen problems after changing motherboard
          by jean luc ferre
          Hello,
          First on my laptop i had a motherboard with a pentium 6100 processor. Installing w11 i was blocked on the 23h2 version...impossibility to upgrade toward 24h2 because the SSE4.2 functionnality of the cpu was missing. About displaying and screen looking all was perfect.
          I changed of motherboard with an intel I3 processor...and now i don't find the previous aspects of the displaying.
          Now i have a veiled screen and pixels are missing though the graphics parameters have not changed.
          Desinstalling and reloading the drivers in the same time on the graphic card (intel hd...
          09-11-2025, 10:28 AM
        • Loading...
        • No more items.
        Working...