I had 3 blinking lights so I had a tech diagnose it for me. Turned out to be the SC board which I just replaced. It now powers on ( solid red light and a dim glow to the screen but no image ) Am I missing something here?
-
-
Re: Panasonic TC-P60ST50 screen lights but no picture
A little more info, I foolishly shotguned a main board and a power supply board in it before having it diagnosed which changed nothing (still 3 blinks) after the SC board I at least get standby power. I tried swapping the power and main boards back to the originals with no change. Just a solid red LED with no codes. TV shuts itself off completely after 10 minutes. Seeing a green LED lit up on SC and SS boards when in standby. Where do I go from here? -
Re: Panasonic TC-P60ST50 screen lights but no picture
A good starting point:
https://www.badcaps.net/forum/showthread.php?t=39740Willing to help but I'm no expert.Comment
-
I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly ‘new' Tcon board this time, and... -
Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!
My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.
This time the original cable broke too close to the screen, it can't be fixed without tearing the screen... -
Have a Samsung UN50NU7400 which shows a boot screen and a screen saver if left on long enough but no picture ?
Would a moving screen saver confirm that the panel is ok or it could still be a panel issue ? -
Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".
It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...07-31-2025, 08:37 PM -
Hello, I need your help for a failure on a laptop:
It's a Packard Bell Kayf0, motherboard LA-5021P, Rev 1.0 with graphic issue.
I received this pc because it was turning on but not displaying anything, the fans are running normally and all chipsets heat up on startup but no picture on screen, no backlight either. I noticed that ENAVDD and ENVDD are not present and that there is no LCDVDD on the connector. I didn't check the screen because, maybe I'm wrong, but if there aren't these signals, even if the screen is good, it can't display anything? I tried heating the...
Comment