42lg5000

[joe-joe]

hallo
this tv works perfect but when i try to turn it off with the remote control
it goes off and a second later it turn on again!?
it s not the remote and it s not the sensor !?

[ReeceyBurger123]

Re: 42lg5000

Sticky remote button ?

[Dgtech]

Re: 42lg5000

Of course the best way to make sure its not the remote is simply to remove the batteries and see if it does this. Check the button on the TV itself. Then take it apart and try it when the button keypad is removed for circuit. Then I'd look for a print.

[joe-joe]

Re: 42lg5000

i already said;it is not the remote control !!
and i unplugged the print that goes to the pushbuttens on the tv
but the tv goes on after 1 second

[dick_barton]

Re: 42lg5000

Check your opto-isolators on the power supply board. A faulty one may be stuck in power on condition.

Edit
Attach diagram

[joe-joe]

Re: 42lg5000

thanks!i try it next week!

[joe-joe]

Re: 42lg5000

i replaced all 4 opto-couplers and all the caps in the power supply!
no diference!?