Sharp Aquos LC-60LE832U seems like it's power cycling

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • gamerchris360
    New Member
    • Mar 2017
    • 4
    • United States
    #1

    Sharp Aquos LC-60LE832U seems like it's power cycling

    Once TV is on and warmed up a while seems like it's power cycling. It'll go completely black, power light stays on, and when the display comes back it's got the input name listed in the upper-right like you just turned the set on.

    Different input resolved this for a while, like a few weeks, then it started again. My friends got rid of the set for this, but I'm not sure it's worthy of the junk pile just yet.

    Ideas?
    Tags: None
    • dskall
      Badcaps Legend
      • Oct 2016
      • 2905
      • usa
      #2
      Re: Sharp Aquos LC-60LE832U seems like it's power cycling

      With flashlight is there an image on screen when black? Is this on hdmi input?
      Last edited by dskall; 03-20-2017, 01:52 PM.
      I assume no responsibility for any stupid suggestions I might post.

        Comment

        • gamerchris360
          New Member
          • Mar 2017
          • 4
          • United States
          #3
          Re: Sharp Aquos LC-60LE832U seems like it's power cycling

          Yes, it is on the HDMI input. It's only out for a couple seconds, I'll have to make it do it again for me to test with flashlight, might be a couple days, pretty crazy schedule this week.

            Comment

            • dskall
              Badcaps Legend
              • Oct 2016
              • 2905
              • usa
              #4
              Re: Sharp Aquos LC-60LE832U seems like it's power cycling

              Can you use input other than hdmi to see if it is input problem?
              I assume no responsibility for any stupid suggestions I might post.

                Comment

                • gamerchris360
                  New Member
                  • Mar 2017
                  • 4
                  • United States
                  #5
                  Re: Sharp Aquos LC-60LE832U seems like it's power cycling

                  There are 4 HDMI, I know this happens on 1 and 2. With Roku and Chromecast as my only sources for video my options are somewhat limited. I have to look around, I might have an old Wii or something that would hook up to component. Will report back when I test.

                    Comment

                    • emilfedorenko
                      New Member
                      • Sep 2017
                      • 2
                      • USA
                      #6
                      Re: Sharp Aquos LC-60LE832U seems like it's power cycling

                      do you solve the problem?

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • scubacamper
                          Sharp Aquos LC-70C6400U Half Screen Dark
                          by scubacamper
                          I found another post on this site the other day which has been very helpful in troubleshooting this issue I am having with my tv. The left half of the screen is dark, and the other half is VERY slow to generate it's image - and it only generates part of its image at that.
                          Based on this yt video, I have narrowed it down to an issue (short?) on the left side of the display, somewhere in the system of ribbon cables.
                          when I remove the bezel and the rear cover, I can get the image to display correctly by manipulating the ribbon cables on the left side which connects the left lower display...
                          https://youtu.be
                          05-03-2025, 12:19 PM
                        • sefoster
                          Sharp Aquos Lc-80LE757U flashing Sharp on screen when plugged in
                          by sefoster
                          I have a Sharp Aquos LC-80LE757U that randomly made a loud popping noise when when watching TV one day. We found that the fuse blew and the thermistor. We ended up replacing the entire power supply board and have also replaced the TCON board. Now as soon as I plug the TV in it lights up and has the Sharp logo flashing on and off of the screen. If I unplug the ribbon cable from the TCON board to the main board I get the 2 long 5 short error code. Any ideas on where to go from here? We've tried resetting it but nothing has worked. If we plug it in and let it cycle through the flashing of the Sharp...
                          11-20-2022, 09:29 AM
                        • jonah1024
                          Sharp Aquos LC-40UG7252E LCD TV burn in?
                          by jonah1024
                          Hello!

                          I'm a few days old into this TV screens repair universe so please bear with me.

                          Recently, and all of a sudden my 40” 4K Sharp Aquos LCD TV turned on with colors all smudged in some places on the screen that remain like that even without any kind of video source. I do have image but the colors are smudged/tinted/ washed out in patches as per defects. This to me looks similar to burn in but I’m shore this is not an OLED.

                          - I did the classic unplug and hold power button to discharge the caps but it didn't help.
                          - I did a factory reset as well...
                          5 Photos
                          07-16-2024, 04:23 AM
                        • high-tech
                          Samsung UN55F7050AFXZA ver. TD01 power cycling
                          by high-tech
                          Hello everybody, I could use some help on this one... It's got me guessing...
                          I took pictures of all the boards and the pin out of the connector on the power supply that goes to the main board... I measured all the pins in relation to chassis ground, here are the result.

                          (B13v)1. 12.7 volts cycling (Vamp) 2. 12.7 volts cycling
                          (B13v)3. 12.7 volts cycling (PWM5) 4. 1.0 volts cycling
                          (OD_LE)5. 2.8 volts cycling (PWM4) 6. 0.9 volts cycling
                          (OD_ON)7. 2.8 volts cycling (PWM3) 8. 0.9 volts cycling
                          9. ground (PWM2) 10. 0.9 volts cycling...
                          09-15-2020, 03:39 PM
                        • klassic
                          Sharp Aquos LC-60LE635E three blinks
                          by klassic
                          Hi community,

                          I will describe my problem with a TV in those short following terms to be the most precise :

                          What i have :
                          Sharp Aquos LC-60LE635E
                          power board DPS-162KP-1
                          main logic board QPWBXF733WJN2

                          symptoms :
                          white led light logo at startup,
                          after 2 minutes, blinking 3 times a row, repeating
                          no backlight (and apparently no picture, checked panel with flashlight)
                          no startup sound

                          powerboard investigations :

                          1-2 PNL : 0v
                          3-4 GND
                          5-6-7-8 UR : 13.15v
                          9-10-11-12...
                          10-24-2023, 01:39 PM
                        • Loading...
                        • No more items.
                        Working...