hello everyone, i have a sanyo/pansonic dp42740-04 set that i need help with the digital board. its 1lg4b10y06900 j4hg 302a the analog board is 1lg4b10y0660a i'm trying to find the digital board and no one has the 302a listed on the sticker. i see a lot of sanyo board that looks just like it with the same componetes and all but wih different numbers like 301a or 305a etc etc anyone know what other boards will wil work?
-
-
Re: sanyo j4hg 302a digital board
Try shopjimmy. The last four digits didn't seem to matter. They usually cross boards with known compatibles.I assume no responsibility for any stupid suggestions I might post. -
Re: sanyo j4hg 302a digital board
i have tryed sj they dont have cant read what is on the board on their site to tell if its correct or not with what i have. was hoping someone here has experience with these boardsComment
-
Re: sanyo j4hg 302a digital board
Well the last four digits didn't seem to matter when I looked it up on shopjimmy just 1lg4b10y06900 j4hgI assume no responsibility for any stupid suggestions I might post.Comment
-
Re: sanyo j4hg 302a digital board
I see shopjimmy also do a repair kit for this board (1LG4B10Y06900) as well as a replacement eeprom (IC5750) it seems to be a common fault on this Digi- board, but as above the last four digits being wrong will not matterComment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
All left and right refers to looking from rear of TV (or looking from front with TV upside down)- TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
- Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
-
Hello, I got this AVR for cheap and tried to fix it as a fun and learning project.
First the audio video receiver would turn on but had no sound at all, but no "PROTECT" message.
So, I opened the metal case and noticed some marks showing that some liquid has been spilled on the amp. Those water marks were found on the main board and the digital board.
I disassembled everything, then checked every single cap on every board of the amp and recapped when needed.
Also fixed A LOT of cold solder joints and also done some modifications,... -
Hi There,
This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.
After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.
More Details
TV Model - LG OLED77G1PUA
Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
Comment