Polaroid le32gcl flashing stanby led followed by logo screen
Collapse
X
-
-
Re: Polaroid le32gcl flashing stanby led followed by logo screen
http://www.ebay.co.uk/itm/POLAROID-L...-/332104937055
if this is the wrong one email the ebay seller with the one you want he has helped me in the past with various thingsLast edited by vinceroger69; 10-21-2017, 10:32 AM.Comment
-
Re: Polaroid le32gcl flashing stanby led followed by logo screen
Thanks Vince ill message him nowComment
-
Re: Polaroid le32gcl flashing stanby led followed by logo screen
sorry vince meant to add the following info :
TV model :Polaroid SSDV2311-I1-D0
mainboard SSDV3241-ZC01-01 SIS288/289
panel number v236bj1-p01
messaged him anyway his eeprom is a different version
thanksLast edited by sordids999; 10-21-2017, 11:16 AM.Comment
-
Re: Polaroid le32gcl flashing stanby led followed by logo screen
UPDATE:
TV working again managed to find a replacement main board but could not find a eeprom
either for this model
thanksComment
-
Re: Polaroid le32gcl flashing stanby led followed by logo screen
Thanks for the update glad to hear you managed too fix the set.Comment
Related Topics
Collapse
-
by VerlengsnoerHi all,
at firs, i hope this is the right place to post my question.
Im looking for a tool to change the bios logo.
everyone knows when you turn on your laptop/pc you will see the manufacturer logo like lenovo, hp, dell...
i know that HP has a build in option to change the splash logo.
but i want to change the manufacturer logo to an own logo.
I try'd Change Logo 5.0, but when i make a backup of an laptop and edit the logo and flash the editted version back on the laptop the logo diddnt change.
...10-28-2022, 09:52 AM -
by maamar-tdjHello,
I am looking for the Dump Firmware of this model.
Mark: Polaroid
Model: TQL48R4PR003
Main board chassis: CV9203H-A42
LCD Screen / Panel: 15y_s48ff11mb7s4lv0.1
More information: W25Q32
thank you for your reply -
by coax81Hello,
i have an issue with my polaroid TV Model : tql39r4pr002
the standby led is red , and when i turn on the TV it shows the polaroid logo and turns off, also the standby led switches to blue the back to red .
capacitors are apparently ok, i have 320V in the smoothing primary capacitor, and 13V in the diodes in the secondary.
i don't understand why the mainboard switches to this mode and don't turn on.
don't find any service manual for this model ,or the main board schematic. cv9203h-a42
thank you for your help.... -
by EchooFujitsu D757 sff desktop pc with company logo and it doesn't work to restore the factory logo with UefiModL tool. I need to restore many of these machines to the factory Fujitsu boot logo! Does anyone know a solution?11-25-2024, 01:54 AM
-
by smartyCan anyone identify logo shown below?
The logo I showed can be found on the PCB's of laptops NP530U3B, NP530U3C, NP540U3B, NP540U3C, etc.
I assume this is a logo of one of the PCB's manufacturers, but I'm not sure.
Neither ChatGPT nor Copilot know the correct answer.
TIA1 Photo - Loading...
- No more items.
Comment