Magnavox 15MF400T/37 remote control code

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • binsonk
    Senior Member
    • Apr 2014
    • 182
    • United States

    #1

    Magnavox 15MF400T/37 remote control code

    I use Philips universal remote controls, exclusively. I have never found the Philips-Magnavox universal remote control code for the Magnavox 15" LCD TV. It was sold just a few months before broadcast TV went digital, and it has an analog tuner. That's not the problem. I have a whole assortment of P-M universal remote controls, but none of the listed codes operate this little TV. I have taken up this task many times before, and I remember a few facts from previous attempts. This Tv may actually respond to code for another brand. I'm fairly sure the IR sensor is working. I just looked up the remote control for this TV, and it has a custom made remote available for sale. Does anyone have experience with this TV? Does anyone know the Philips universal remote control code for this TV?

    Magnavox 15" LCD TV 15MF400T/37
    DOM: Dec 2006
    dated 08/09/2007

Related Topics

Collapse

  • Document Archive
    LCD LED TV Service Menu Codes
    by Document Archive
    ALL LCD LED TV SERVICE MENU CODES

    Service Menu Code with Board Name

    China Universal Board / Jumper Board Service Menu Code
    Changhong Ruba Service Menu Code
    Ecostar LED TV Service Menu Code
    Orient LED TV Service Menu Code
    Haier LED TV Service Menu Code
    TCL LED TV Service Menu Code
    Samsung LED TV Service Menu Code
    LG LED TV Service Menu Code
    Videocon LED TV Service Menu Code
    Supra LED TV Service Menu Code
    Toshiba LED TV Service Menu Code
    Symphony LED TV Service Menu Code
    Veste/ LED TV Service Menu Code...
    10-31-2024, 03:58 AM
  • Chrissygizmo
    Panasonic tx-40cx400b universal remote code needed
    by Chrissygizmo
    Hi all

    Just a quick question...

    Does anyone know the actual "ONE FOR ALL" universal remote code for a Panasonic TX-40CX400B?

    I have downloaded the manual for it but the tv doesn't do anything. I can get it to power off when using some of the codes but no other buttons work , it won't even turn back on with the remote unless it's immediately after switching off 🤯 ...

    Thanks...
    08-29-2021, 08:02 PM
  • hemant_2222
    Schematic for Denon Remote Control RC1156
    by hemant_2222
    Hello Everyone,

    Hope everyone is enjoying their repairs at hand!.

    I am looking forward to get the schematic of Denon remote control RC1156. Actually long time no use of the remote leaked the battery thereby corroding few parts as well as the tracks.

    I was able to join few of them but the remote is still not working, so i am looking forward for your help, in case anyone understand the schematic or the remote circuit diagram and could me assist me in repairing it.

    Please refer to the attached picture, i think the voltage divider is missing...
    10-06-2023, 02:05 AM
  • dfear
    hitachi 75hl16t64u - not responding to remote control
    by dfear
    I have a hitachi 75hl16t64u tv in for repair and it is driving me crazy.
    It came in for a power issue which I have finally resolved by replacing the power supply.

    The current issue is that the TV does not respond to the remote control. I have replaced the IR sensor board with a used one but the fault persists.

    Anyone have a clue how to fix TV?

    FYI: I have checked the remote work s by pointing it at my camera on my phone....
    09-02-2024, 12:15 PM
  • barrybahr
    Magnavox 32MD350B/F7 getting a false on/off control voltage
    by barrybahr
    Hello,
    The unit is stuck in an intermittent on/off cycle. When I plug in the power cord, the green "On" light activates without any command, flashes for a few seconds, then turns off. The red standby light comes on for a few seconds before the cycle repeats. During this time, I cannot turn off the unit manually; it will shut off automatically after about five minutes, and there is no picture. Occasionally, with repeated attempts to power it on, I eventually get a picture and sound, which function properly. When it does work, I measure several voltages, and they appear to be normal....
    04-20-2025, 10:30 PM
  • Loading...
  • No more items.
Working...