Panasonic Viera LED TH60CX700A - Sound / Backlights Working - No Picture

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • dandan556
    New Member
    • Jun 2020
    • 2
    • UK
    #21
    Re: Panasonic Viera LED TH60CX700A - Sound / Backlights Working - No Picture

    1) So you get the same result when one cable between T-CON and the LCD panel is connected one at time and you do have 12V at both ends of the T-con fuse, correct?
    Yes, exactly the same results.
    2) If the above is true then you need to check the resistance of the MLCC on the tab bonding boards as suggested. ACEMAN never posts back what he found.
    Thanks I'll check this when I get chance, which side is the issue most likely to be on? The side that doesn't change once unplugged or the one that goes bright white?

      Comment

      Previous 1 2 template Next

      Related Topics

      Collapse
      • iglitare
        Sony KD-75XF9005 grey Picture but Sound. TCON or panel?
        by iglitare
        Hi,

        i want to repair a Sony KD-75XF9005 TV that initially only showed a grey picture.
        Backlight seems to work, Sound (Setup menu after reset) works.
        If i dissconnect the left FFC cable from TCON to panel i have half a screen on the right. If left cable is connected always only the grey screen.
        Interchanged the cables, its always only the right side that is working. Always grey if left side is connected.
        With my small knowledge i would think at least the cables are good.

        Can this happen because of a bad tcon board?
        Or is it always a bad/shorted...
        09-04-2025, 07:13 AM
      • kca
        LG 82UN8570AUD ~ TCON or PANEL?
        by kca
        Hello all ~

        Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

        When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

        I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
        08-31-2025, 06:38 AM
      • FZG
        Panasonic AG-1000B VHS player with bad picture quality
        by FZG
        Hello!

        I recently got an old VHS player from Panasonic and just for fun I want to try to repair this device. It is an AG-1000B portable VHS player from 1990 and it has a problem with picture quality in playback mode.

        Picture in playback mode is very noisy and often loses sync but the still images are nearly perfect.

        I want to know, is this something that could be solved by recapping or is the video head likely gone?

        Also, what mechanism is this?

        Any feedback is appreciated!...
        05-06-2024, 07:16 AM
      • DXseekerMO
        TCL 55US57 backlights, no picture.
        by DXseekerMO
        So here we go with another screen short TCL. For this exercise left and right will be reference looking at the screen.

        The person I got this TV from said the color was bad in a vertical fashion about 1/4 of the way over the left side of the screen. Shortly after the symptoms below started.

        Power Supply, main and T-CON board are working.

        Symptoms: The TV has backlights but no picture with both FFC's attached to the T-CON and does not respond to the remote or buttons, and the TV appears to continuously re-boot.

        Unhook FFC from left side...
        09-18-2021, 03:56 PM
      • Bazfletch3
        Panasonic TH-65FX800A backlight LED's working but picture is very dark
        by Bazfletch3
        Hi all

        While I have quite a decent background in electrical & electronic troubleshooting & repairs, this is my first time stripping down an LCD TV for repair.... I have inherited a 3yr old Panasonic LCD which has a picture, but it is quite dark (too dark to be watchable - but still quite easy to see; I didnt need a torch to see it).

        I started by checking and trying to adjust all of the picture and backlighting levels, but that made little to no difference. I also did a factory reset.

        From there I envisaged that the backlighting wasn't working, however...
        01-08-2024, 10:18 PM
      • Loading...
      • No more items.
      Working...