Philips 42pfl7977,in standby only

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rawan
    Senior Member
    • Oct 2009
    • 57
    #1

    Philips 42pfl7977,in standby only

    Hi,\
    I have Philips tv , only front led on, nothing else, no power on with remote or front control,
    Any help please,
    I have upload pict. of Main board.
    Is it possible to upload software in this condition??if it is software problem
    Thanks
    Manoj
    Attached Files
    Tags: None
    • dick_barton
      Badcaps Legend
      • Aug 2015
      • 6642
      • Wales
      #2
      Re: Philips 42pfl7977,in standby only

      You need to post some pictures of your circuit boards and also post the power supply voltages.
      Willing to help but I'm no expert.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Diah
          Philips NVM.bin Collection.- no Chat only upload / download
          by Diah
          this threat collection of NVM.bin of Philips LCD / OLED TVs, recently many users faced problem with Displaying and Penal Code at time replacement of MB.

          please when you own NVM file upload in this threat and name the TV Model..

          2k17_TPM172E_N2O_NVM_v59 ( 130 EU Model ) ( 12 RUS Model )
          2k17_TPM171E_2k18_N2O_NVM_v59 ( 130 EU Model ) ( 12 RUS Model )...
          01-14-2025, 01:31 PM
        • Bad_IC
          Philips TV 37pfl5604h/12 no standby voltage
          by Bad_IC


          Hello,
          I have a problem with this TV, the standby voltage is not present. I have checked the components around the IC fsq510's area and they seem to work, also replaced this IC but the problem persists.
          These are the voltages in some pins of IC fsq510:
          Vcc=18v
          D=320v
          Vstr=154v
          Unfortunately, I couldn't find the schematic
          What else could I check?
          Is it possible to provide standby voltage from an external source to allow the TV to turn on?
          Thank you​...
          11-08-2024, 01:07 PM
        • tvguy12012012120
          Zombie Samsung UN55NU6900F dead / no standby voltage - randomly came to life after hours of troubleshooting then died
          by tvguy12012012120
          This is my first attempt at troubleshooting a board like this, I know I could just buy a new board but I'm curious to figure out how this works. I've been testing different components in the evenings this week and I think the problem is with the IC failing to start up for some reason. When the board is plugged in there is no standby voltage.

          Then today it randomly sprung to life like a zombie but shortly died thereafter. I have no idea why it would have done that and its the first time I've seen it running. I discharged capacitors on the board last night, then it was sitting today....
          02-07-2025, 05:13 PM
        • Raulnn
          Philips 43pft4112/12 blinking standby
          by Raulnn
          good evening. I have this basic tv, with an all-in-one board. This tv has a common fault in the primary power area. the tv did not turn on. I bought a repair kit. I have installed all the parts of the kit, but now the tv turns on the standby light intermittently but does not start. the flashing is very fast. What can be? Does anyone know the model? Thank you
          01-08-2023, 04:13 PM
        • fharris1977
          Vizio D50u-D1 Dead Set No Standby
          by fharris1977
          Hi. I got a Vizio with no power or standby, and won't turn on with remote or button. I checked the voltages on the connector and all read 0.00V or nearly 0(0.050 ON/OFF pin). None of the pins are labeled STB for standby although I do see some 5V pins. Other than the obvious standby led, which isn't coming on, is there a way to check for standby voltage on this PS. I'm trying to see if my problem is the PS or mainboard. Some Vizios I have fixed with no standby led me to think it was the PS but it turned out being the mainboard. Any experience with this set would be greatly appreciated.
          1 Photo
          12-28-2023, 10:25 AM
        • Loading...
        • No more items.
        Working...