Vizio L32 HDTV10A

[Fisher77]

This tv will not turn on. It has no standby light. I tested the voltage on the power supply. It does not have 5V, 12V or 24V coming out of it. I tested the 2 mosfets, and they are working correctly. No bulging caps. Do not see any burnt components on the board. Would appreciate any help with this.

[Fisher77]

Re: Vizio L32 HDTV10A

Bump

[Fisher77]

Re: Vizio L32 HDTV10A

Finally had time to look at this some more today. I found this hot spot on the board. There is a transistor C3209, two resistors, a Zener Diode 1N5383B and a IC - ICE3B1565 all in the burnt looking area. The transistor, and both resistors tested good out of circuit. The Zener was blowed sky high. For the ICE3B1565, I have no idea where to begin on testing it. I was hoping someone on the forum could give me a rundown on the testing procedures for it.

I took a picture of the nice toasty area of the board.

Thanks

[dick_barton]

Re: Vizio L32 HDTV10A

Those items are indicated in the following repair kit.

http://www.ebay.ca/itm/VIZIO-0500-05...-/191669959538