LG 60PB6650-UA Plasma Issues

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • FireBird
    New Member
    • Oct 2016
    • 4
    • USA
    #1

    LG 60PB6650-UA Plasma Issues

    Thank you all in advance for you time and knowledge.

    LG 60PB6650-UA Plasma

    My wife was watching TV and it made a loud pop and the screen went black. Sound but no display.

    Had a shop repair the YSUS board, and I bought new buffer boards and replaced both YSUS/buffers. Now the TV has a display but the colors are off, almost looks inverted and I see small colored dots on the screen.. almost like static in color. (See attached photo)

    So I jumped the control board for a test pattern, all the colors look good but the large white vertical and horizontal wipes aren't solid and have some lines static in them. (See attached video link)

    Video of the test pattern with Control board jumpered.

    https://drive.google.com/file/d/0ByK...ew?usp=sharing

    1. ZSUS Board replaced
    2. LG 60PB6650 Y-sus repaired
    3. Both Buffer boards replaced

    I'm wondering if the ZSUS board replacement I purchased is also bad and I'm checking all the solder joints now to repair them on the ZSUS board.

    Any ideas? Thank you
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • FireBird
      New Member
      • Oct 2016
      • 4
      • USA
      #2
      Re: LG 60PB6650-UA Plasma Issues

      Really need some help on this... any advise? Thank you

        Comment

        • oleg_yj
          New Member
          • Apr 2012
          • 4
          • USA
          #3
          Re: LG 60PB6650-UA Plasma Issues

          I know, it is late answer. I suspect that is Y-sus adjustment issue. Thank you.

            Comment

            • ReeceyBurger123
              Never Give Up !
              • May 2014
              • 7325
              • Britain
              #4
              Re: LG 60PB6650-UA Plasma Issues

              Zsus issue, take it back to the and tell them to sort it properly they should of tested it. Also Zsus erc coils with bad solder joints cause this but they are what kills the Ysus from the start.
              Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

              https://www.facebook.com/Telford-Tel...7894576335359/

                Comment

                • Pitoniak
                  Member
                  • Jan 2017
                  • 26
                  • Usa
                  #5
                  Re: LG 60PB6650-UA Plasma Issues

                  I had the same tv screen goes gray - red light blinks loud pop
                  Last edited by Pitoniak; 01-05-2017, 06:51 PM.

                    Comment

                    • ReeceyBurger123
                      Never Give Up !
                      • May 2014
                      • 7325
                      • Britain
                      #6
                      Re: LG 60PB6650-UA Plasma Issues

                      So you kept running it ?
                      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                      https://www.facebook.com/Telford-Tel...7894576335359/

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • PlasMatt
                          LG 60PV450 Possible Bad YSUS Need help confirming Diagnosis
                          by PlasMatt
                          I have an LG plasma that after reading through a bunch of posts and doing some testing I believe has a bad YSUS board. The problem is that that doesn't make sense to me for some of the symptoms. The problem started yesterday. While watching a movie the TV just shut down like I pressed power. I have it hooked to a PC and use RS232 to turn it off and on so I thought maybe something had glitched there. I turned it back on and finished the movie with no problems. The same thing happened today so I checked logs to see if something in the control glitched and sent an off command but it didn't, After...
                          09-20-2025, 06:50 PM
                        • Salvatore057
                          plasma TV Lg 42w451 - why is the zsus igbts damaged when the ysus is plugged?
                          by Salvatore057
                          Hi all,
                          I am trying to fix my plasma TV which is not powering on due to damaged IGBTs. I have changed two igbts and 2 IC drivers on the zsus and also two igbts on the ysus.
                          Now everytime I plugged the ZSUS and the YSUS boards to the power board, the two 30f124 IGBT on the ZSUS are damaged and the TV stays in standby mode. When I plug the ZSUS board alone the TV turns ON but I do not see pictures. When I plug the ZSUS board without the two 30f124 IGBTs and the YSUS board, the TV powers on with a picture.
                          I am lost, should I change the YSUS board? Is the YSUS board damaging...
                          04-29-2018, 01:29 PM
                        • gretti
                          MSI Z370-A Pro, works but does not power off or reboot and USB issues
                          by gretti
                          I have a MSI Z370-A Pro. The board does not reboot or shut down from the Windows recovery console. USB communications stop and the status light on USB 1 stays on and does not blink. I have programmed a new BIOS with a CH341A programmer already, swapped RAM, PSU, CPU. The board will power off when the power button is held and resets when the reset switch is pressed, but it will not react to the reset switch if already told by software to shut down or restart. The board will reboot from BIOS after a save and exit command.

                          The MSI BIOS included the ME firmware for the board. The size...
                          10-16-2025, 02:14 AM
                        • JDC
                          LG 60PB6650 - Bad ZSUS (3.8v to YSUS instead of 16v)?
                          by JDC
                          Make and Model: LG 60PB6650-UA
                          Issue: Turns on, no backlight, can hear static (no channel)

                          I've been repairing TVs for a couple years now. I know how to use a multimeter for the most part and know how to test most components for shorts.

                          The power board connects to the ZSUS and then connects to the YSUS. The ZSUS is where I believe the failure is because the 16v line is only 3.8V, even when I disconnect the ZSUS from the YSUS.

                          This particular model seems to have a common failure with its YSUS. My goal earlier was to prove the YSUS was bad so I could...
                          09-13-2018, 02:12 PM
                        • r-p
                          Maldischarge-link that fixes it with replacing caps
                          by r-p
                          Starting this thread because Capkid doesn't seem to be reprogramming controlboards anymore (LG 60PZ950 with red maldischarge) and my game-plasma also has maldischarge (Hitachi 42PD3200). So I will grasp at straws to keep them running. I am extremely bad at throwing stuff away.

                          Is there any merit to this link?

                          Very short version: Specific caps seem to loose their capacitance and/or increase their ESR. This may cause the maldischarge. Replace them with better/bigger/newer ones and problem solved.

                          From the limited knowledge I have on the subject, I think...
                          01-21-2020, 05:16 PM
                        • Loading...
                        • No more items.
                        Working...