Philips TV with badly hissing Vestel 17IPS20P supply, any solution ?

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Dannyx
    CertifiedAxhole
    • Aug 2016
    • 3912
    • Romania
    #21
    Re: Philips TV with badly hissing Vestel 17IPS20P supply, any solution ?

    Originally posted by R_J
    So all 4 are connected in parallel and only for one voltage? ( the diagram is a bit misleading)
    Should've taken a photo of the underside too. Actually, only 3 of them are in parallel - the fourth one goes somewhere else...can't remember the layout exactly, but I'm sure it's the one closest to the outside edge of the board that does this...might be the 5v tap of the transformer.
    Wattevah...

      Comment

      Previous 1 2 template Next

      Related Topics

      Collapse
      • Yrouel
        Philips 22PFL2908H/12 - Vestel 17MB62-1 - Possible to enable HDMI CEC?
        by Yrouel
        I have this tv for which I'd like to enable HDMI CEC (EasyLink as Philips calls it) if possible.

        The CPU/SoC should support it and I found about the possibility of customizing the TV behavior/functionality with the hardware and software profiles.

        I also got serial access to the TV through the SCART connector (side note how do you dump the firmware through that port?)

        I'm attaching everything I got about this TV: A zipped folder with various material like the profiles, a log of the boot process, a picture of the service menu, etc.; the service manual...
        05-23-2021, 06:59 AM
      • France_53
        Vestel tv, how to flip the image?
        by France_53
        Hello everyone from Italy, I'm here to ask for help on a Vestel TV, I've had a Vestel TV branded "XD" with a broken screen for years, but now I've found a Telefunken (still Vestel but older) and I've mounted the panel on the "XD" TV, it works, but the screen is upside down, given that Vestel does not allow you to rotate the image from the service menu, does anyone know how to solve the problem? the original panel is marked ves315WNDS-2D-N12 while the main board 17mb110, the panel I mounted instead in the tv (from the telefunken) is a ves315WNDA-02. ... It is not worth repairing...
        05-12-2024, 05:22 AM
      • G33RT
        Philips 8200 series 65PUS8204/12 stuck at Philips Logo
        by G33RT
        Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

        It does power up when pressing the power button.

        I already try the power button while plugin the plug with no result.
        Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

        Could this be an PSU or eMMC issue ?
        07-19-2025, 03:43 AM
      • FlailingEngineer
        Help with Bush Tv (Vestel 17mb95m Mainboard)
        by FlailingEngineer
        Hi, I was recently given a Bush Smart TV by a friend and the main board seems to be hanging on by a thread.

        Before we get to that, my first obstacle was figuring out the model number since the back sticker has gone for a walk. Upon taking off the back case, I noticed the following Vestel parts, 17MB95m mainboard, 17IPS71 (what I'd assume is power supply) and a VES420UNVL-3D-S02 display panel. After doing some research I think the TV I have is a Bush ELED42240FHDCNTD3D, based on the matching image here (https://www.manualslib.com/manual/11...td3d.html#manu...
        05-31-2023, 06:52 AM
      • Lisa Su
        Samsung P2250W Hissing (Newbie)
        by Lisa Su
        I've been using this monitor for last few years.

        Symptom started by OSD menu popping on and off randomly by itself. So i tried to clean the touch control area with some cloth but it didn't help.

        After 20 minutes monitor started hissing from the back. And then 30-40 seconds later screen started fade off/on like as if i was turning down the brightness that's when i turned it off by power button (hissing stops) and replaced it with spare monitor.

        Today i opened up the monitor, excited to repair my first monitor (or big electronics) hoping it's a bad...
        03-07-2022, 05:58 AM
      • Loading...
      • No more items.
      Working...