So I have completed the 10 blink repair on MC201 and MC301. Now i am getting a one blink and no power to screen. The manual doesn't really show a one blink as an error code but just says its and communication error with microcomputer, No diagnostics given. Please advise me where to start. Thanks in advance!
-
-
Re: TH50PZ85U One blink after repairing 10 blink
Solved the one blink, There was one connector i forgot to plug back in after the repair. Fired it up and turned right on. It was on for 3-4 mins and went dead again! F301 on the power supply is blown and the heat sink on Q301 Q201 is extremely hot to touch. What is causing this?
Comment