Hi guys; i repaired my Hd Nfusion Satellite Receiver power Supply by replacing a few Caps,i used a couple 1000uf very good used caps that i had in my scrap, but i used 85degrees instead of 105 degrees,but i compensated by building a small 5 v fan on top of all the caps after opening a hole on the case,my question is? will this be enough to compensate for the less degrees temp of the caps
-
Last edited by ivtec; 08-16-2016, 01:45 PM. -
Re: Less temp degrees on caps?
The old cap low ESR type? Switching power supply?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809 -
Re: Less temp degrees on caps?
not too much Temp deferent, if the 1000uf 25-50 volts are. with fan good idea but it would be better if the fan pull air from the box to out sideLast edited by Diah; 08-16-2016, 01:52 PM.Comment
-
Re: Less temp degrees on caps?
Thanks the receiver already has a small fan in the back.You think i should reverse the fan?Originally posted by Diah View PostComment
Comment