Replacing a MSD309.8B board

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 6ot4hr
    Senior Member
    • Oct 2014
    • 87
    • Croatia
    #1

    Replacing a MSD309.8B board

    Hi guys, i have a dead TV set with original MSD309.8B 10304 Mbo shorted somewhere in traces / RAM (voltage regulator just gets too hot and drops voltage). Easiest solution is to replace a mbo.

    Anyhow, is it possible to replace it with similar MSD306.8B 10305 or T.MSD306.8B 10305.

    I see that all connectors are the same, so should it work with my lcd pane and just have a different firmware on itl?

    (reason, original board is 50-70$, which is beyond economical repair cost)
    Last edited by 6ot4hr; 08-08-2016, 03:48 PM.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • m1ch43lzm
      HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
      by m1ch43lzm
      Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
      Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
      05-12-2025, 08:37 PM
    • Noodneek
      Replacing all the caps on the BenQ SW2700pt's power board didn't help...
      by Noodneek
      My 3.5 years old monitor (BenQ SW2700pt) started to black out for 1-2 sec every minute or so, it was doing this even with PC disconnected from it. I searched online and read that it's probably aging capacitors and there's a workaround to lower the brightness.

      I lowered it from 100 to 65% and it indeed helped, but after a couple of months the issue returned... I continued to lower the brightness, but it helped only for a couple of hours at most, then I needed to lower it further... Turning the monitor off and waiting for it to cool down also helped for a short time, after which it...
      08-30-2024, 12:52 PM
    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      ORIGINAL POWER SUPPLY BOARD
      7 Photos
      11-22-2024, 01:46 PM
    • MacGyver's paperclip
      what to check before replacing hybrid MOSFET/controller IC on SAMSUNG TV power board
      by MacGyver's paperclip
      TLDNR; Have an old SAMSUNG TV with blown hybrid MOSFET/controller IC on power board to be replaced; replaced blown main capacitor on same power board several years ago successfully, and TV has been working fine since until this IC popped all of a sudden. Want to know what if anything to check on board to make sure before replacing and testing with new IC. Have 2 new matching ICs, DIP socket to make removal/replacement easier, a whole other known-good power board with which to compare, if necessary.
      07-01-2023, 12:12 PM
    • sam_sam_sam
      Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock
      by sam_sam_sam
      I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

      This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

      After all of...
      07-13-2024, 08:14 PM
    • Loading...
    • No more items.
    Working...