Panasonic plasma TC-P42C2 10 blinks

[tw2005]

Re: Panasonic plasma TC-P42C2 10 blinks

Thanks for your help! Is there any way to replace whats necessary on each board? I can solder.

sure but how easy do think that is? Not.

For $66 honestly go the safe pathe for the SN, for the SS you may get away with replacing just those 4 transistors. There are kits available and replacing other parts like the 16 pin Driver IC is a good idea and the 5 pin driver transistor.

We are talking surface components too.

I've done a couple but not always successful first go.

If you got nothing better to do go for it but do some searches on the models and board numbers to get an idea of what's involved.



Or for $30-40 you could get a working used

If the kit fails, especially on the SN then you've done that money and then what? Another kit to maybe fail again.

[stepka]

Re: Panasonic plasma TC-P42C2 10 blinks

Sounds good... Thanks for your help.

[stepka]

Re: Panasonic plasma TC-P42C2 10 blinks

Sounds good... Thanks for your help.